Cubieboard(A10) lubuntu desktop SDK包出炉

matson

已经把制作Cubieboard(A10) lubuntu 12.04 desktop的SDK包发出来了。下载路径是
http://ubuntuone.com/3JynInE9jgV5IUiqNZPr0v
下载后解压，只需要运行：
make livesuit-cb ROOTFS=rootfs/linaro-quantal-alip-20130422-342.tar.gz
即可生成最终的livesuit的image包。由于包含了所有源码，所以任何定制也都是可以的

bob80155

/home/user/cubieboard/cb-a10-ubuntu-desktop-1204/u-boot-sunxi/common/stdio.c:244: undefined reference to `serial_tstc'
arm-linux-gnueabihf-ld.bfd: BFD (GNU Binutils for Ubuntu) 2.22 assertion fail ../../bfd/elf32-arm.c:13830
/bin/bash: line 1: 10973 程式記憶體區段錯誤   (core dumped) arm-linux-gnueabihf-ld.bfd -pie -T /home/user/cubieboard/cb-a10-ubuntu-desktop-1204/build/cubieboard-u-boot/u-boot.lds -Bstatic $UNDEF_SYM arch/arm/cpu/armv7/start.o --start-group api/libapi.o arch/arm/cpu/armv7/libarmv7.o arch/arm/cpu/armv7/sunxi/libsunxi.o arch/arm/lib/libarm.o board/allwinner/common/liballwinner.o common/libcommon.o disk/libdisk.o drivers/bios_emulator/libatibiosemu.o drivers/block/libblock.o drivers/dfu/libdfu.o drivers/dma/libdma.o drivers/fpga/libfpga.o drivers/gpio/libgpio.o drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o drivers/input/libinput.o drivers/misc/libmisc.o drivers/mmc/libmmc.o drivers/mtd/libmtd.o drivers/mtd/nand/libnand.o drivers/mtd/onenand/libonenand.o drivers/mtd/spi/libspi_flash.o drivers/mtd/ubi/libubi.o drivers/net/libnet.o drivers/net/phy/libphy.o drivers/pci/libpci.o drivers/pcmcia/libpcmcia.o drivers/power/libpower.o drivers/rtc/librtc.o drivers/serial/libserial.o drivers/spi/libspi.o drivers/twserial/libtws.o drivers/usb/eth/libusb_eth.o drivers/usb/gadget/libusb_gadget.o drivers/usb/host/libusb_host.o drivers/usb/musb/libusb_musb.o drivers/usb/phy/libusb_phy.o drivers/usb/ulpi/libusb_ulpi.o drivers/video/libvideo.o drivers/watchdog/libwatchdog.o fs/cramfs/libcramfs.o fs/ext4/libext4fs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o fs/reiserfs/libreiserfs.o fs/ubifs/libubifs.o fs/yaffs2/libyaffs2.o fs/zfs/libzfs.o lib/libfdt/libfdt.o lib/libgeneric.o lib/lzma/liblzma.o lib/lzo/liblzo.o lib/zlib/libz.o net/libnet.o post/libpost.o test/libtest.o board/allwinner/cubieboard/libcubieboard.o --end-group /home/user/cubieboard/cb-a10-ubuntu-desktop-1204/build/cubieboard-u-boot/arch/arm/lib/eabi_compat.o -L /usr/lib/gcc/arm-linux-gnueabihf/4.6 -lgcc -Map u-boot.map -o u-boot
make[1]: *** [/home/user/cubieboard/cb-a10-ubuntu-desktop-1204/build/cubieboard-u-boot/u-boot] Error 139
make[1]: Leaving directory `/home/user/cubieboard/cb-a10-ubuntu-desktop-1204/u-boot-sunxi'
make: *** [u-boot] Error 2

運行後產生以上錯誤
請問是什麼原因
有人有想法嗎?

謝謝

matson

bob80155 发表于 2013-7-13 17:37
/home/user/cubieboard/cb-a10-ubuntu-desktop-1204/u-boot-sunxi/common/stdio.c:244: undefined referenc ...

可能是u-boot的环境没有清理干净。试一下
cd u-boot
make CROSS_COMPILE=your-toolchian distclean
然后重新试一下

slackwareer

请问楼主，在livesuit中怎么修改script.fex？

inpressing

下载下来怎么是个镜像文件？？？？

matson

inpressing 发表于 2013-8-4 22:21
下载下来怎么是个镜像文件？？？？

http://cubiebook.org/index.php?title=Cubieboard/lubuntu_sdk_v1.03

alexlee

bob80155 发表于 2013-7-13 17:37
/home/user/cubieboard/cb-a10-ubuntu-desktop-1204/u-boot-sunxi/common/stdio.c:244: undefined referenc ...

请问你怎么解决这个问题的，我也遇到同样的问题了，非常感谢

alexlee

matson 发表于 2013-7-13 17:51
可能是u-boot的环境没有清理干净。试一下
cd u-boot
make CROSS_COMPILE=your-toolchian distclean

matson，你好，按照你说的办法试了，还是不行，不知道是什么原因

xiaji261

您好，我照您的方法做了，出现了一个错误
sunxi-tools/fex2bin: 1: sunxi-tools/fex2bin: Syntax error: end of file unexpected (expecting ")")
这是什么情况啊？怎么解决？谢谢

tianguau

xiaji261 发表于 2013-12-21 13:43
您好，我照您的方法做了，出现了一个错误
sunxi-tools/fex2bin: 1: sunxi-tools/fex2bin: Syntax error: en ...

这个应该是Linux和windows换行不同导致的