求助A20刷机问题 "Wait for PnpFesIn timeout!"

singleye · 发表于 2013-6-22 16:37:31

刚到手的A20板子，尝试刷ubuntu但没成功，麻烦高手看看是怎么回事，谢谢！

过程：
1. 先用Livesuit，在Mac OS上卡在3%的地方不动。

2. 然后用XP上的Livesuit，显示"Image file invalid!"

3. 后来换用PhoenixSuit。

PhoenixSuit步骤：
1. 拔掉所有外界设备。
2. 开启PhoenixSuit，并且选中硬盘上的image文件。
3. 关机状态下按住 FEL键不放，然后接上mini usb到OTG口。
4. 可以看到PhoenixSuit有响应选择，并且选择“强制格式化”，界面进入"Begin to Upgrade Firmware to Device"状态，但是没有任何进度。并且用Dbgview可以看到:
[2304] *********** after Fel2Fes *********"
[2304] OUT 1
5. 过一会儿PhoenixSuit显示"Wait for PnpFesIn timeout!"，并且Dbgviiew显示：
[2304] Wait for fes device timeout

singleye · 发表于 2013-6-22 16:38:02

Dbgview的全程输出信息：
00000000 4:28:13 PM [2304] Img_OpenItem now!
00000001 4:28:13 PM [2304] Img_OpenItem[PXTOOLSB][XXXXXXXXXXXXXXXX]
00000002 4:28:13 PM [2304] Closing image now!
00000003 4:28:13 PM [2304] CloseImage OK
00000004 4:28:29 PM ADD: 192.168.232.132
00000005 4:28:29 PM ADD: everywhe-d209bc.localdomain
00000006 4:28:29 PM ADD: everywhe-d209bc.localdomain.
00000007 4:28:29 PM ADD: everywhe-d209bc
00000008 4:28:29 PM ADD: everywhe-d209bc.
00000009 4:29:29 PM [2304] IN 1
00000010 4:29:29 PM [2304] PnpFelIn  current m_tools_if is NULL
00000011 4:29:29 PM [2304] Img_OpenItem now!
00000012 4:29:29 PM [2304] Img_OpenItem[PXTOOLSB][XXXXXXXXXXXXXXXX]
00000013 4:29:29 PM [2304] Closing image now!
00000014 4:29:29 PM [2304] CloseImage OK
00000015 4:29:29 PM [2304] Img_OpenItem now!
00000016 4:29:29 PM [2304] Img_OpenItem[COMMON  ][SYS_CONFIG100000]
00000017 4:29:29 PM [2304] WRN:f(get_sys_config_para)L1225: storage_type -1 not support, would try nand then card2.
00000018 4:29:29 PM [2304] Cfg storage type is 255.
00000019 4:29:29 PM [2304] Img_OpenItem now!
00000020 4:29:29 PM [2304] Img_OpenItem[12345678][1234567890dlinfo]
00000021 4:29:29 PM [2304] Img_OpenItem now!
00000022 4:29:29 PM [2304] Img_OpenItem[12345678][1234567890___mbr]
00000023 4:29:29 PM [2304] MemSz=0x100000 , itemlen 0x10000
00000024 4:29:29 PM [2304] =============sys_config==========
00000025 4:29:29 PM [2304] =======<Tools updated at [1/6/2013] by Sam.Wu, check if fes version at least 096>=====
00000026 4:29:29 PM [2304] dram->reallen = 0x0
00000027 4:29:29 PM [2304] -------sys_config------
00000028 4:29:29 PM [2304] sys_config_t_size  = 0x2884
00000029 4:29:29 PM [2304] version          = 0x100
00000030 4:29:29 PM [2304] magic             = 20090319
00000031 4:29:29 PM [2304]
00000032 4:29:29 PM [2304] magic             = SYS_PARA
00000033 4:29:29 PM [2304] ver             = 256
00000034 4:29:29 PM [2304] enable_erase_nand  = 0
00000035 4:29:29 PM [2304] enable_jtag       = 0
00000036 4:29:29 PM [2304] ----------------epos_para-------------
00000037 4:29:29 PM [2304] chip    =0
00000038 4:29:29 PM [2304] pid       =0
00000039 4:29:29 PM [2304] sid       =0
00000040 4:29:29 PM [2304] bid       =0
00000041 4:29:29 PM [2304] target.debugenable  =0
00000042 4:29:29 PM [2304] target.burnClk    =720
00000043 4:29:29 PM [2304]
00000044 4:29:29 PM [2304] ---------dram_para-----------
00000045 4:29:29 PM [2304] dram_baseaddr    = 0x40000000
00000046 4:29:29 PM [2304] dram_clk       = 432
00000047 4:29:29 PM [2304] dram_type       = 3
00000048 4:29:29 PM [2304] dram_rank_num    = -1
00000049 4:29:29 PM [2304] dram_chip_density = -1
00000050 4:29:29 PM [2304] dram_io_width    = -1
00000051 4:29:29 PM [2304] dram_bus_width = -1
00000052 4:29:29 PM [2304] dram_cas       = 9
00000053 4:29:29 PM [2304] dram_zq          = 0x7f
00000054 4:29:29 PM [2304] dram_odt_en    = 0
00000055 4:29:29 PM [2304] dram_size       = -1
00000056 4:29:29 PM [2304] dram_tpr0       = 0x42d899b7
00000057 4:29:29 PM [2304] dram_tpr1       = 0xa090
00000058 4:29:29 PM [2304] dram_tpr2       = 0x22a00
00000059 4:29:29 PM [2304] dram_tpr3       = 0x0
00000060 4:29:29 PM [2304] dram_tpr4       = 0x1
00000061 4:29:29 PM [2304] dram_tpr5       = 0x0
00000062 4:29:29 PM [2304] dram_emr1       = 0x4
00000063 4:29:29 PM [2304] dram_emr2       = 0x10
00000064 4:29:29 PM [2304] dram_emr3       = 0x0
00000065 4:29:29 PM [2304]
00000066 4:29:29 PM [2304] p1_para->Battery_cap = 0
00000067 4:29:29 PM [2304] p1_para->Discharge_current_rate = 0
00000068 4:29:29 PM [2304]
00000069 4:29:29 PM [2304]
00000070 4:29:29 PM [2304] ---------------boot_extend------------------
00000071 4:29:29 PM [2304] sys_config_para->vol_threshold = 0
00000072 4:29:29 PM [2304]
00000073 4:29:29 PM [2304]
00000074 4:29:29 PM [2304] ----------product_para---------
00000075 4:29:29 PM [2304] magic = (null)
00000076 4:29:29 PM [2304] ver = 0
00000077 4:29:29 PM [2304] size  = 0
00000078 4:29:29 PM [2304] magic =
00000079 4:29:29 PM [2304] magic =
00000080 4:29:29 PM [2304]
00000081 4:29:29 PM [2304] ----------part_para---In [KBtes]------
00000082 4:29:29 PM [2304] ///////////max part number is 32. , configured part is 4.
00000083 4:29:29 PM [2304] mbr_size    = 16384
00000084 4:29:29 PM [2304] part_num    = 4
00000085 4:29:29 PM [2304] [part0]
00000086 4:29:29 PM [2304] lenhi       = 0KB
00000087 4:29:29 PM [2304] lenlo       = 32768KB
00000088 4:29:29 PM [2304] classname = DISK
00000089 4:29:29 PM [2304] name       = bootloader
00000090 4:29:29 PM [2304] user_type = 0
00000091 4:29:29 PM [2304] ro          = 0
00000092 4:29:29 PM [2304] [part1]
00000093 4:29:29 PM [2304] lenhi       = 0KB
00000094 4:29:29 PM [2304] lenlo       = 16384KB
00000095 4:29:29 PM [2304] classname = DISK
00000096 4:29:29 PM [2304] name       = env
00000097 4:29:29 PM [2304] user_type = 0
00000098 4:29:29 PM [2304] ro          = 0
00000099 4:29:29 PM [2304] [part2]
00000100 4:29:29 PM [2304] lenhi       = 0KB
00000101 4:29:29 PM [2304] lenlo       = 16384KB
00000102 4:29:29 PM [2304] classname = DISK
00000103 4:29:29 PM [2304] name       = boot
00000104 4:29:29 PM [2304] user_type = 0
00000105 4:29:29 PM [2304] ro          = 0
00000106 4:29:29 PM [2304] [part3]
00000107 4:29:29 PM [2304] lenhi       = 0KB
00000108 4:29:29 PM [2304] lenlo       = 2097152KB
00000109 4:29:29 PM [2304] classname = DISK
00000110 4:29:29 PM [2304] name       = rootfs
00000111 4:29:29 PM [2304] user_type = 0
00000112 4:29:29 PM [2304] ro          = 0
00000113 4:29:29 PM [2304]
00000114 4:29:29 PM [2304] ----------down_para---------
00000115 4:29:29 PM [2304] /////////max downLoad items is 32. , configured downLoad is 4.
00000116 4:29:29 PM [2304] down_num    = 4
00000117 4:29:29 PM [2304] [download_para0]
00000118 4:29:29 PM [2304] part_name    = bootloader
00000119 4:29:29 PM [2304] pkt_name    = BOOTLOADER_FEX00
00000120 4:29:29 PM [2304] verify_file = VBOOTLOADER_FEX0
00000121 4:29:29 PM [2304] encrypt       = 0
00000122 4:29:29 PM [2304] [download_para1]
00000123 4:29:29 PM [2304] part_name    = env
00000124 4:29:29 PM [2304] pkt_name    = ENV_FEX000000000
00000125 4:29:29 PM [2304] verify_file = VENV_FEX00000000
00000126 4:29:29 PM [2304] encrypt       = 0
00000127 4:29:29 PM [2304] [download_para2]
00000128 4:29:29 PM [2304] part_name    = boot
00000129 4:29:29 PM [2304] pkt_name    = BOOT_FEX00000000
00000130 4:29:29 PM [2304] verify_file = VBOOT_FEX0000000
00000131 4:29:29 PM [2304] encrypt       = 0
00000132 4:29:29 PM [2304] [download_para3]
00000133 4:29:29 PM [2304] part_name    = rootfs
00000134 4:29:29 PM [2304] pkt_name    = ROOTFS_FEX000000
00000135 4:29:29 PM [2304] verify_file = VROOTFS_FEX00000
00000136 4:29:29 PM [2304] encrypt       = 0
00000137 4:29:29 PM [2304]
00000138 4:29:29 PM [2304] ---uart para---
00000139 4:29:29 PM [2304] uart_debug_port = 0.
00000140 4:29:29 PM [2304] uart_debug_tx = port:pB22<2><1><-1><-1>.
00000141 4:29:29 PM [2304]
00000142 4:29:29 PM [2304] ----------fex misc---------
00000143 4:29:29 PM [2304] restore = 0
00000144 4:29:29 PM [2304] env_pkt = 0
00000145 4:29:29 PM [2304] storage_type = 255.
00000146 4:29:29 PM [2304]
00000147 4:29:29 PM [2304] --[card_burn_para]--
00000148 4:29:29 PM [2304] card_no = 2.
00000149 4:29:29 PM [2304] card_Line  = 4.
00000150 4:29:29 PM [2304] card_mode  = 1.
00000151 4:29:29 PM [2304] sdc_d1 = port:pC9<3><1><-1><-1>.
00000152 4:29:29 PM [2304] sdc_d0 = port:pC8<3><1><-1><-1>.
00000153 4:29:29 PM [2304] sdc_clk = port:pC7<3><1><-1><-1>.
00000154 4:29:29 PM [2304] sdc_cmd = port:pC6<3><1><-1><-1>.
00000155 4:29:29 PM [2304] sdc_d3 = port:pC11<3><1><-1><-1>.
00000156 4:29:29 PM [2304] sdc_d2 = port:pC10<3><1><-1><-1>.
00000157 4:29:29 PM [2304] ---[card_boot]---
00000158 4:29:29 PM [2304] logical_start = 40960
00000159 4:29:29 PM [2304]
00000160 4:29:29 PM [2304]
00000161 4:29:29 PM [2304] ============================================
00000162 4:29:29 PM [2304] Closing image now!
00000163 4:29:29 PM [2304] CloseImage OK
00000164 4:29:30 PM [2304] ********* before Fel2Fes *********
00000165 4:29:30 PM [2304] down and run fes1-1
00000166 4:29:30 PM [2304] Img_OpenItem now!
00000167 4:29:30 PM [2304] Img_OpenItem[FES    ][FES_1-1000000000]
00000168 4:29:30 PM [2304] down and run fes1-2
00000169 4:29:30 PM [2304] Clear dram log OK.
00000170 4:29:30 PM [2304] Img_OpenItem now!
00000171 4:29:30 PM [2304] Img_OpenItem[FES    ][FES_1-2000000000]
00000172 4:29:30 PM [2304] DOWN FES1_dram OK
00000173 4:29:31 PM [2304] update dram size to 1024MB
00000174 4:29:31 PM [2304] RUN fes1-2 OK.
00000175 4:29:31 PM [2304] INFO: Simple Test for Dram is OK.
00000176 4:29:31 PM [2304]
00000177 4:29:31 PM [2304]  INFO: dram initialize successful
00000178 4:29:31 PM [2304]
00000179 4:29:31 PM [2304] fel other=0x406fe0
00000180 4:29:31 PM [2304] OS SourceCodePage = 936
00000181 4:29:37 PM [2304] user choose to erase=1
00000182 4:29:37 PM [2304] Img_OpenItem now!
00000183 4:29:37 PM [2304] Img_OpenItem[FES    ][FES_000000000000]
00000184 4:29:37 PM [2304] Img_OpenItem now!
00000185 4:29:37 PM [2304] Img_OpenItem[FES    ][FES_200000000000]
00000186 4:29:37 PM [2304] INFO: run fes2
00000187 4:29:37 PM [2304] Closing image now!
00000188 4:29:37 PM [2304] CloseImage OK
00000189 4:29:37 PM [2304] *********** after Fel2Fes *********
00000190 4:29:38 PM [2304] OUT 1
00000191 4:30:37 PM [2304] Wait for fes device timeout

singleye · 发表于 2013-6-22 17:55:51

另外还试验了用TF卡的方法也不成功。

卡： 32G TF

系统image：从http://cubieboard.org/download/ 找来的这个

###########################################################
SDCARD Images

The sdcard image is suitable to write to a 4GB or lager macro SD card. You need an image writer tool like Win32diskimager or dd to write the image to a blank SD card.

Download Ubuntu/Linaro image for sd card [1.8GB]
###########################################################

在XP上用win32diskimager写在卡上后放到cubieboard上，然后接上电源线/HDMI线，系统自动点亮电源附近的红灯（其他灯都不亮）。

然后强制按电源关机再次开机，现象一样。

请问是不是板子有问题啊？

singleye · 发表于 2013-6-26 20:04:47

换用了物理机上安装的win7可以正常刷机了。
之前用的mac os上的livesuit和虚拟机里都不行，希望能给遇到同样问题的同学一点帮助。

ruyiff · 发表于 2013-6-27 22:35:00

我比你好点的是TF卡可以把镜像烧进去，冒失硬件问题吧，我买的A10。正好A20出了，发回去，加钱换A20了。

JJJJJJJack · 发表于 2013-6-30 22:37:23

A20应该是不能用livesuit刷的，只能用phone
而且有人说需要一直按住FEL按键

zyoung · 发表于 2013-8-7 22:43:44

singleye 发表于 2013-6-26 20:04
换用了物理机上安装的win7可以正常刷机了。
之前用的mac os上的livesuit和虚拟机里都不行，希望能给遇到同 ...

这个问题解决了没？是什么问题？

zyoung · 发表于 2013-8-7 22:44:06

singleye 发表于 2013-6-26 20:04
换用了物理机上安装的win7可以正常刷机了。
之前用的mac os上的livesuit和虚拟机里都不行，希望能给遇到同 ...

这个问题解决了没？是什么问题？

tll · 发表于 2013-8-7 23:14:23

ruyiff 发表于 2013-6-27 22:35
我比你好点的是TF卡可以把镜像烧进去，冒失硬件问题吧，我买的A10。正好A20出了，发回去，加钱换A20了。 ...

实话说我更喜欢A10，因为A20太不成熟了

caxxca · 发表于 2014-7-28 18:53:28

singleye 发表于 2013-6-26 20:04
换用了物理机上安装的win7可以正常刷机了。
之前用的mac os上的livesuit和虚拟机里都不行，希望能给遇到同 ...

请问这个问题有结果吗？

		自动登录	找回密码
密码			立即注册