安装教程做的,最后在加载模块时报错!
insmod bcmdhd.ko
主要提示的错误有如下:
<4>mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
dhd_module_init: sdio_register_driver timeout or error
错误提示如下,略长。。。。
<6>bcmdhd: got gpio2, mapped to irqno-22
[ 173.226336] bcmdhd: got gpio2, mapped to irqno-22
dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON
[ 173.240177] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON
<6>sdio wifi power state: on
[ 173.652812] sdio wifi power state: on
<6>[mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 173.664752] [mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc3 power on
[ 173.677654] [mmc-msg] sdc3 power on
<6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 173.705692] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc3 set round clock 400000, src 24000000
[ 173.721082] [mmc-msg] sdc3 set round clock 400000, src 24000000
<3>[mmc-err] smc 3 err, cmd 52, RTO
[ 173.803038] [mmc-err] smc 3 err, cmd 52, RTO
<3>[mmc-err] smc 3 err, cmd 52, RTO
[ 173.812583] [mmc-err] smc 3 err, cmd 52, RTO
<6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 173.825387] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 173.853284] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<3>[mmc-err] smc 3 err, cmd 8, RTO
[ 173.871860] [mmc-err] smc 3 err, cmd 8, RTO
<6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 173.884933] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 173.910784] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
<4>mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 173.923533] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<4>mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 173.936317] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<4>mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 173.950428] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
<6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 173.980854] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
<6>[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 173.999654] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
<6>[mmc-msg] sdc3 set round clock 42857143, src 600000000
[ 174.015474] [mmc-msg] sdc3 set round clock 42857143, src 600000000
=========== WLAN placed in POWER ON ========
[ 174.061567] =========== WLAN placed in POWER ON ========
<6>[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 174.096352] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
<6>mmc1: new high speed SDIO card at address 0001
[ 174.114650] mmc1: new high speed SDIO card at address 0001
Linux Kernel SDIO/MMC Driver
[ 174.128173] Linux Kernel SDIO/MMC Driver
<6>bcmdhd: irq=-22, flags=0x00000414
[ 174.136339] bcmdhd: irq=-22, flags=0x00000414
bcmsdh_probe: Host irq is not defined
[ 174.144287] bcmsdh_probe: Host irq is not defined
<4>bcmsdh_sdmmc: probe of mmc1:0001:2 failed with error 1
[ 174.154376] bcmsdh_sdmmc: probe of mmc1:0001:2 failed with error 1
Dongle Host Driver, version 1.28.23.3 (r)
Compiled in drivers/net/wireless/bcmdhd on Apr 26 2015 at 22:07:16
[ 174.172006]
[ 174.172036] Dongle Host Driver, version 1.28.23.3 (r)
[ 174.172055] Compiled in drivers/net/wireless/bcmdhd on Apr 26 2015 at 22:07:16
<3>bcm4330: exports duplicate symbol bcmsdh_probe (owned by bcmdhd)
[ 174.272908] bcm4330: exports duplicate symbol bcmsdh_probe (owned by bcmdhd)
<3>bcm4330: exports duplicate symbol bcmsdh_probe (owned by bcmdhd)
[ 174.298786] bcm4330: exports duplicate symbol bcmsdh_probe (owned by bcmdhd)
dhd_module_init: sdio_register_driver timeout or error
[ 186.192341] dhd_module_init: sdio_register_driver timeout or error
<1>Unable to handle kernel NULL pointer dereference at virtual address 00000014
[ 186.205910] Unable to handle kernel NULL pointer dereference at virtual address 00000014
<1>pgd = ee448000
[ 186.217194] pgd = ee448000
<1>[00000014] *pgd=00000000[ 186.222404] [00000014] *pgd=00000000
<0>Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[ 186.231017] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
<d>Modules linked in:[ 186.238186] Modules linked in: bcmdhd(+) bcmdhd(+)
CPU: 0 Not tainted (3.4.61+ #9)
[ 186.246494] CPU: 0 Not tainted (3.4.61+ #9)
PC is at bcmsdh_remove+0x14/0xc0 [bcmdhd]
[ 186.255114] PC is at bcmsdh_remove+0x14/0xc0 [bcmdhd]
LR is at bcmsdh_sdmmc_remove+0x28/0x6c [bcmdhd]
[ 186.264721] LR is at bcmsdh_sdmmc_remove+0x28/0x6c [bcmdhd]
pc : [<bf0213f4>] lr : [<bf001694>] psr: a0000013
sp : eea57e20 ip : 00000000 fp : 0000822d
[ 186.279197] pc : [<bf0213f4>] lr : [<bf001694>] psr: a0000013
[ 186.279218] sp : eea57e20 ip : 00000000 fp : 0000822d
r10: 00000000 r9 : bf062088 r8 : bf06074c
[ 186.294722] r10: 00000000 r9 : bf062088 r8 : bf06074c
r7 : bf0623bc r6 : 00000000 r5 : bf0639f4 r4 : ee9fa408
[ 186.305333] r7 : bf0623bc r6 : 00000000 r5 : bf0639f4 r4 : ee9fa408
r3 : bf012234 r2 : eea57e30 r1 : 60000013 r0 : ee9fa408
[ 186.317098] r3 : bf012234 r2 : eea57e30 r1 : 60000013 r0 : ee9fa408
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 186.329473] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 10c5387d Table: 6e44806a DAC: 00000015
[ 186.341067] Control: 10c5387d Table: 6e44806a DAC: 00000015
SP: 0xeea57da0:
[ 186.348525]
[ 186.348534] SP: 0xeea57da0:
Segmentation fault
|