求助：编译Linux3.4内核失败

zq9610

编译环境：Ubuntu12.04 LTS 64bit（运行于PD虚拟机上）
目标板：CB2
编译过程：
/lichee/linux-3.4$ make clean
/lichee/linux-3.4$ sudo cp arch/arm/configs/sun7ismp_android_defconfig .config
/lichee/linux-3.4$ cd ..
/lichee$ ./build.sh -p sun7i_android




我就没有成功编译出Android一次。。好忧桑

到底哪儿出问题了呢 大家帮忙看看

有两个错误的地方：

1.   OBJCOPY arch/arm/boot/zImage
   
2.   Kernel: arch/arm/boot/zImage is ready
   
3.   UIMAGE  arch/arm/boot/uImage
   
4. /usr/bin/mkimage: Can't map arch/arm/boot/uImage: Invalid argument
   
5. make[1]: *** [arch/arm/boot/uImage] 错误 1
   
6. make: *** [uImage] 错误 2
   
7. make: *** 正在等待未完成的任务....
   
8. WARNING: modpost: Found 2 section mismatch(es).
   
9. To see full details build your kernel with:
   
10. 'make CONFIG_DEBUG_SECTION_MISMATCH=y'

复制代码

1.   LD [M]  drivers/net/wireless/rtl8189es/8189es.ko
   
2. arm-linux-gnueabi-ld: warning: drivers/net/wireless/bcm4330/bcm4330.mod.o uses 4-byte wchar_t yet the output is to use 2-byte wchar_t; use of wchar_t values across objects may fail
   
3.   LD [M]  drivers/net/wireless/rtl8192cu/8192cu.ko
   
4.   LD [M]  drivers/net/wireless/rtl8723as/8723as.ko
   
5.   LD [M]  drivers/scsi/scsi_wait_scan.ko
   
6.   LD [M]  drivers/video/sun7i/disp/disp.ko
   
7.   LD [M]  drivers/video/sun7i/lcd/lcd.ko
   
8. ERROR: build kernel Failed
   

复制代码

jiangdou

/lichee/linux-3.4$ make mrproper
/lichee/linux-3.4$ cp arch/arm/configs/cubieboard_xxx .config
/lichee$./build.sh -p sun7i_android
再试试

zq9610

jiangdou 发表于 2015-1-21 21:46
/lichee/linux-3.4$ make mrproper
/lichee/linux-3.4$  cp arch/arm/configs/cubieboard_xxx .config
/lic ...

忘了说了，我用的4.4的源码，你可以在这里下载：
http://yunpan.cn/cKgKC6uZmLUTk  提取码 4dd3

把422的配置拷贝过来还是不行，依旧出错，

1. arch/arm/mach-sun7i/core.c: In function ‘sun7i_reserve’:
   
2. arch/arm/mach-sun7i/core.c:164:34: error: ‘ION_CARVEOUT_MEM_BASE’ undeclared (first use in this function)
   
3. arch/arm/mach-sun7i/core.c:164:34: note: each undeclared identifier is reported only once for each function it appears in
   
4. make[1]: *** [arch/arm/mach-sun7i/core.o] 错误 1
   
5. make: *** [arch/arm/mach-sun7i] 错误 2
   
6. make: *** 正在等待未完成的任务....
   
7.   CC      arch/arm/kernel/armksyms.o
   
8.   CC      arch/arm/mm/vmregion.o
   
9.   CC      arch/arm/mm/rodata.o
   
10.   CC      arch/arm/kernel/module.o
    
11. arch/arm/mm/rodata.c: In function ‘set_page_attributes’:
    
12. arch/arm/mm/rodata.c:91:4: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘pmd_t’ [-Wformat]
    

复制代码