新买的板子烧写系统到nand flash以后无法重启

wizardoz

同样的镜像，同样的tf卡，旧的cubieboard都可以正常烧写。但是最近新买了几个板子，发现烧写后都无法启动。
旧板的CPU：

提示错误为：

1. HELLO! BOOT0 is starting!
   
2. boot0 version : 3.0.0
   
3. dram size =1024
   
4. sum=0x01be1e34
   
5. src_sum=0x01be1e34
   
6. Ready to disable icache.
   
7. Jump to secend Boot.
   
8. [      0.131]
   
9. 
   
10. U-Boot 2011.09-rc1-00003-ge89ab14-dirty (Jan 03 2014 - 12:57:33) Allwinner Technology
    
11. 
    
12. [      0.140]version: 1.1.0
    
13. [      0.143]pmbus:   ready
    
14. [      0.248]PMU: AXP209
    
15. [      0.251]PMU: AXP20x found
    
16. [      0.254]PMU: bat ratio = 100
    
17. [      0.257]after set, dcdc2 =1400mv
    
18. [      0.260]PMU: dcdc2 1400
    
19. [      0.263]PMU: pll1 912 Mhz
    
20. boot_clock = 912
    
21. dcdc2_vol = 1400
    
22. [      0.271]after set, dcdc2 =1400mv
    
23. dcdc3_vol = 1250
    
24. ldo2_vol = 3000
    
25. ldo3_vol = 2800
    
26. ldo4_vol = 2800
    
27. power_start = 0
    
28. storage_type = -1
    
29. usb_recovery = 1
    
30. find power_sply to end
    
31. fel key old mode
    
32. run key detect
    
33. no key found
    
34. no key input
    
35. dram_para_set start
    
36. dram_para_set end
    
37. [      0.307]DRAM:  1 GiB
    
38. relocation Offset is: 35b23000
    
39. donn't initialize ther user_gpio (main_key:boot_init_gpio)
    
40. DRV_DISP_Init: opened
    
41. [      0.521]boot_disp.output_type=2
    
42. [      0.525]boot_disp.output_mode=5
    
43. [      0.528]boot_disp.auto_hpd=1
    
44. workmode = 0
    
45. [      1.832]NAND: NAND_UbootInit
    
46. NB1 : enter NAND_LogicInit
    
47. nand : get id_number_ctl from script, 3
    
48. not burn nand partition table!
    
49. NB1 : nand_info_init fail
    
50. [      5.061]nand init fail
    
51. set to recovery
    
52. try sprite_led_gpio config
    
53. sprite_led_gpio start
    
54. sunxi sprite begin
    
55. screen_width = 800
    
56. screen_height = 480
    
57. bar x1: 200 y1: 200
    
58. bar x2: 600 y2: 280
    
59. read mbr failed
    
60. sprite update error: no data part found
    
61. read mbr failed
    
62. sprite update error: read image start error
    
63. sprite update error: current card sprite failed
    
64. now hold the machine
    
65. fail to find part named env
    
66. Using default environment
    
67. 
    
68. In:    serial
    
69. Out:   serial
    
70. Err:   serial
    
71. --------fastboot partitions--------
    
72. mbr not exist
    
73. base bootcmd=run setargs_nand boot_normal
    
74. bootcmd set setargs_nand
    
75. key 0
    
76. recovery key high 6, low 4
    
77. cant find fstbt value
    
78. no misc partition is found
    
79. to be run cmd=run setargs_nand boot_normal
    
80. the part isn't exist
    
81. WORK_MODE_BOOT
    
82. WORK_MODE_BOOT
    
83. [      5.154]Hit any key to stop autoboot:  0
    
84. cant find part named boot
    
85. sunxi_flash - sunxi_flash sub-system
    
86. 
    
87. Usage:
    
88. sunxi_flash read command parmeters :
    
89. parmeters 0 : addr to load(hex only)
    
90. parmeters 1 : the name of the part to be load
    
91. [parmeters 2] : the number of bytes to be load(hex only)
    
92. if [parmeters 2] not exist, the number of bytes to be load is the size of the part indecated on partemeter 1
    
93. boota: bad boot image magic, maybe not a boot.img?
    
94. sunxi#

复制代码

cubieplayer

这个问题已经解决了，用cubian-nandinstall 1.1.1

wkloh

cubieplayer 发表于 2014-5-28 09:58
这个问题已经解决了，用cubian-nandinstall 1.1.1

cubieplayer版主，你好！

我现在用的cubieboard A20 RevB， cubian 桌面版 TF卡。 用 “apt-cache policy cubian-nandinstall”  显示 cubian-nandinstall 1.1-4，更新后写入nand flash，nand flash依旧不能启动。

是我用cubian-nandinstall版本不对吗？

1. HELLO! BOOT0 is starting!
   
2. boot0 version : 3.0.0
   
3. dram size =1024
   
4. sum=0x01be1e3a
   
5. src_sum=0x01be1e3a
   
6. Ready to disable icache.
   
7. Jump to secend Boot.
   
8. [      0.131]
   
9. 
   
10. U-Boot 2011.09-rc1-00003-ge89ab14-dirty (Jan 03 2014 - 12:57:33) Allwinner Technology
    
11. 
    
12. [      0.140]version: 1.1.0
    
13. [      0.143]pmbus:   ready
    
14. [      0.248]PMU: AXP209
    
15. [      0.251]PMU: AXP20x found
    
16. [      0.254]PMU: bat ratio = 100
    
17. [      0.257]after set, dcdc2 =1400mv
    
18. [      0.261]PMU: dcdc2 1400
    
19. [      0.263]PMU: pll1 912 Mhz
    
20. boot_clock = 912
    
21. dcdc2_vol = 1400
    
22. [      0.271]after set, dcdc2 =1400mv
    
23. dcdc3_vol = 1250
    
24. ldo2_vol = 3000
    
25. ldo3_vol = 2800
    
26. ldo4_vol = 2800
    
27. power_start = 0
    
28. storage_type = -1
    
29. usb_recovery = 1
    
30. find power_sply to end
    
31. fel key old mode
    
32. run key detect
    
33. no key found
    
34. no key input
    
35. dram_para_set start
    
36. dram_para_set end
    
37. [      0.307]DRAM:  1 GiB
    
38. relocation Offset is: 35b23000
    
39. donn't initialize ther user_gpio (main_key:boot_init_gpio)
    
40. DRV_DISP_Init: opened
    
41. [      0.521]boot_disp.output_type=4
    
42. [      0.525]boot_disp.output_mode=4
    
43. [      0.528]boot_disp.auto_hpd=1
    
44. workmode = 0
    
45. [      1.832]NAND: NAND_UbootInit
    
46. NB1 : enter NAND_LogicInit
    
47. nand : get id_number_ctl from script, 3
    
48. not burn nand partition table!
    
49. NB1 : nand_info_init fail
    
50. [      4.346]nand init fail
    
51. set to recovery
    
52. try sprite_led_gpio config
    
53. sprite_led_gpio start
    
54. sunxi sprite begin
    
55. screen_width = 800
    
56. screen_height = 480
    
57. bar x1: 200 y1: 200
    
58. bar x2: 600 y2: 280
    
59. read mbr failed
    
60. sprite update error: no data part found
    
61. read mbr failed
    
62. sprite update error: read image start error
    
63. sprite update error: current card sprite failed
    
64. now hold the machine
    
65. fail to find part named env
    
66. Using default environment
    
67. 
    
68. In:    serial
    
69. Out:   serial
    
70. Err:   serial
    
71. --------fastboot partitions--------
    
72. mbr not exist
    
73. base bootcmd=run setargs_nand boot_normal
    
74. bootcmd set setargs_nand
    
75. key 0
    
76. recovery key high 6, low 4
    
77. cant find fstbt value
    
78. no misc partition is found
    
79. to be run cmd=run setargs_nand boot_normal
    
80. the part isn't exist
    
81. WORK_MODE_BOOT
    
82. WORK_MODE_BOOT
    
83. [      4.440]Hit any key to stop autoboot:  0
    
84. cant find part named boot
    
85. sunxi_flash - sunxi_flash sub-system
    
86. 
    
87. Usage:
    
88. sunxi_flash read command parmeters :
    
89. parmeters 0 : addr to load(hex only)
    
90. parmeters 1 : the name of the part to be load
    
91. [parmeters 2] : the number of bytes to be load(hex only)
    
92. if [parmeters 2] not exist, the number of bytes to be load is the size of the part indecated on partemeter 1
    
93. boota: bad boot image magic, maybe not a boot.img?
    
94. sunxi#

复制代码

cubieplayer

wkloh 发表于 2014-6-7 16:25
cubieplayer版主，你好！

我现在用的cubieboard A20 RevB， cubian 桌面版 TF卡。 用 “apt-cache polic ...

回头我把我的nand的头1M数据发给你，你dd一下看能不能解决，估计是头部有magic code

cubieplayer

wkloh 发表于 2014-6-7 16:25
cubieplayer版主，你好！

我现在用的cubieboard A20 RevB， cubian 桌面版 TF卡。 用 “apt-cache polic ...

回头我把我的nand的头1M数据发给你，你dd一下看能不能解决，估计是头部有magic code

wkloh

谢谢，等待中。。。

应为接触了cubian，才开始学习linux，请问 dd是不是这样设置：
dd if=/dev/zero of=/dev/nanda bs=1k count=1024 //清空 uboot 1M空间
dd if=1M.bin of=/dev/nanda bs=1024 seek=8 //倒入 1M数据

cubieplayer

wkloh 发表于 2014-6-13 08:19
谢谢，等待中。。。

应为接触了cubian，才开始学习linux，请问 dd是不是这样设置：

设备应该是/dev/nand而不是/dev/nanda

1. dd if=/dev/zero of=/dev/nand bs=1k count=1024 //清空 uboot 1M空间

复制代码

这个不需要seek=8，你这个命令原来的意思是从1M.bin导入数据，但是跳过头部的8k，我们不许要这么做，直接用下面命令即可

1. dd if=1M.bin of=/dev/nand bs=1024 //倒入 1M数据

复制代码

wkloh

cubieplayer 发表于 2014-6-13 10:05
设备应该是/dev/nand而不是/dev/nanda这个不需要seek=8，你这个命令原来的意思是从1M.bin导入数据，但是跳 ...

我是参考soloforce版主的http://forum.cubietech.com/forum ... &extra=page%3D1[/url]的文档，还是误解了dd命令的用法，谢谢版主提点。

版主你可以把数据发到我的邮箱wahkiangloh@hotmail.com吗?

测试后再回来报告进展。

wkloh

cubieplayer 发表于 2014-6-12 10:17
回头我把我的nand的头1M数据发给你，你dd一下看能不能解决，估计是头部有magic code ...

cubieplayer版主，请问可以发你的nand的头1M数据给我做测试吗？这个1M数据可以用在cubietruck的nand 吗。

aaron

wkloh 发表于 2014-6-16 20:59
cubieplayer版主，请问可以发你的nand的头1M数据给我做测试吗？这个1M数据可以用在cubietruck的nand 吗。 ...

问题解决了么，亲