ubuntu烧到TF卡上，cubieboard2不能启动

hermitbin

我从http://www.gplsquared.com/eoma_boot/eoma_boot.html#Ubunt_13_04_3D 下载的cubieboard2的ubuntu固件通过Win32DiskImager写到tf卡上，可是每次都不能从tf卡启动，而是直接从nand启动。
我只烧录了“cubie_eoma_ubuntu_13_04_3d.bin”， 没有烧录 “uSD_stage_sda1_cubie2.bin”， 请问后面的bin文件需要烧录吗，怎么烧录，有没有指导文件，我是新手，对这些不太懂。麻烦各位高手指导下，谢谢！！


启动时的打印如下：

1. HELLO! BOOT0 is starting!
   
2. boot0 version : 3.0.0
   
3. dram size =1024
   
4. sum=0x37180653
   
5. src_sum=0x37180653
   
6. Ready to disable icache.
   
7. Jump to secend Boot.
   
8. [      0.128]
   
9. 
   
10. U-Boot 2011.09-rc1-dirty (Nov 08 2013 - 11:06:32) Allwinner Technology
    
11. 
    
12. [      0.136]version: 1.1.0
    
13. [      0.139]pmbus:   ready
    
14. [      0.243]PMU: AXP209
    
15. [      0.246]PMU: AXP20x found
    
16. [      0.249]PMU: bat ratio = 100
    
17. [      0.252]after set, dcdc2 =1400mv
    
18. [      0.256]PMU: dcdc2 1400
    
19. [      0.258]PMU: pll1 912 Mhz
    
20. boot_clock = 912
    
21. dcdc2_vol = 1400
    
22. [      0.266]after set, dcdc2 =1400mv
    
23. dcdc3_vol = 1250
    
24. ldo2_vol = 3000
    
25. ldo3_vol = 2800
    
26. ldo4_vol = 2800
    
27. power_start = 0
    
28. storage_type = -1
    
29. usb_recovery = 1
    
30. find power_sply to end
    
31. fel key old mode
    
32. run key detect
    
33. no key found
    
34. no key input
    
35. dram_para_set start
    
36. dram_para_set end
    
37. [      0.302]DRAM:  1 GiB
    
38. relocation Offset is: 35b27000
    
39. donn't initialize ther user_gpio (main_key:boot_init_gpio)
    
40. DRV_DISP_Init: opened
    
41. [      0.516]boot_disp.output_type=2
    
42. [      0.519]boot_disp.output_mode=5
    
43. [      0.523]boot_disp.auto_hpd=1
    
44. Hdmi_dvi_enable is NULL
    
45. Hdmi_get_input_csc is NULL
    
46. workmode = 0
    
47. [      0.564]NAND: NAND_UbootInit
    
48. NB1 : enter NAND_LogicInit
    
49. nand : get id_number_ctl from script, 3
    
50. not burn nand partition table!
    
51. NB1 : nftl num: 3
    
52. init nftl: 0
    
53. NB1 : NAND_LogicInit ok, result = 0x0
    
54. [      0.801]sunxi flash init ok
    
55. set to recovery
    
56. try sprite_led_gpio config
    
57. sprite_led_gpio start
    
58. sunxi sprite begin
    
59. screen_width = 1280
    
60. screen_height = 720
    
61. bar x1: 320 y1: 320
    
62. bar x2: 960 y2: 400
    
63. part name  = bootloader
    
64. part start = 32768
    
65. part size  = 65536
    
66. part name  = env
    
67. part start = 98304
    
68. part size  = 32768
    
69. part name  = boot
    
70. part start = 131072
    
71. part size  = 32768
    
72. part name  = system
    
73. part start = 163840
    
74. part size  = 1048576
    
75. part name  = recovery
    
76. part start = 1212416
    
77. part size  = 65536
    
78. part name  = databk
    
79. part start = 1277952
    
80. part size  = 524288
    
81. part name  = misc
    
82. part start = 1802240
    
83. part size  = 32768
    
84. part name  = private
    
85. part start = 1835008
    
86. part size  = 32768
    
87. part name  = data
    
88. part start = 1867776
    
89. part size  = 2097152
    
90. part name  = cache
    
91. part start = 3964928
    
92. part size  = 655360
    
93. part name  = UDISK
    
94. part start = 4620288
    
95. part size  = 0
    
96. data part size=2097152
    
97. begin erase part data
    
98. finish erase part data
    
99. part name  = bootloader
    
100. part start = 32768
     
101. part size  = 65536
     
102. part name  = env
     
103. part start = 98304
     
104. part size  = 32768
     
105. part name  = boot
     
106. part start = 131072
     
107. part size  = 32768
     
108. part name  = system
     
109. part start = 163840
     
110. part size  = 1048576
     
111. part name  = recovery
     
112. part start = 1212416
     
113. part size  = 65536
     
114. part name  = databk
     
115. part start = 1277952
     
116. part size  = 524288
     
117. part name  = misc
     
118. part start = 1802240
     
119. part size  = 32768
     
120. part name  = private
     
121. part start = 1835008
     
122. part size  = 32768
     
123. part name  = data
     
124. part start = 1867776
     
125. part size  = 2097152
     
126. part name  = cache
     
127. part start = 3964928
     
128. part size  = 655360
     
129. part name  = UDISK
     
130. part start = 4620288
     
131. part size  = 0
     
132. sprite update error: read image start error
     
133. sprite update error: current card sprite failed
     
134. now hold the machine
     
135. In:    serial
     
136. Out:   serial
     
137. Err:   serial
     
138. --------fastboot partitions--------
     
139. -total partitions:11-
     
140. -name-        -start-       -size-     
     
141. bootloader  : 1000000       2000000   
     
142. env         : 3000000       1000000   
     
143. boot        : 4000000       1000000   
     
144. system      : 5000000       20000000   
     
145. recovery    : 25000000      2000000   
     
146. databk      : 27000000      10000000   
     
147. misc        : 37000000      1000000   
     
148. private     : 38000000      1000000   
     
149. data        : 39000000      40000000   
     
150. cache       : 79000000      14000000   
     
151. UDISK       : 8d000000      0         
     
152. -----------------------------------
     
153. base bootcmd=run setargs_nand boot_normal
     
154. bootcmd set setargs_nand
     
155. key 0
     
156. recovery key high 6, low 4
     
157. cant find fstbt value
     
158. to be run cmd=run setargs_nand boot_normal
     
159. the user data'magic is bad
     
160. WORK_MODE_BOOT
     
161. WORK_MODE_BOOT
     
162. [      1.066]Hit any key to stop autoboot:  0
     
163. read boot or recovery all
     
164. [      1.658]sunxi flash read :offset 4000000, 11645855 bytes OK
     
165. [      1.667]ready to boot
     
166. NAND_UbootExit
     
167. NB1 : NAND_LogicExit
     
168. [      1.670]
     
169. Starting kernel ...
     
170. 
     
171. [    0.653965] aw_pm_init: not support super standby.
     
172. [    0.696458] can't get item for emac_power gpio !
     
173. [    0.956158] rtc_hw_init(416) err: set clksrc to external losc failed! rtc time will be wrong
     
174. [    0.965719] sunxi_rtc_gettime(34): err, losc_err_flag is 1
     
175. [    1.040845] [hdmi]hdmi module init
     
176. [    1.045951] ##fb init:w=1280,h=720,fbmode=3
     
177. [    1.071327] sunxi_rtc_gettime(34): err, losc_err_flag is 1
     
178. [    1.077436] sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
     
179. [    1.088944] init: reading config file
     
180. [    1.095370] init: -----------娌℃壘鍒皊ata鑺傜偣锛宯and鍚姩--------------
     
181. [    1.798401] init: HDMI status = 1, try 11 times!TV status = 0
     
182. [    3.461940] init: start e2fsck listening...
     
183. [    3.582749] init: do_umount: /data
     
184. [    3.859399] init: do_umount: /cache
     
185. [    3.951912] init: dont need format /dev/block/UDISK
     
186. [    3.959580] init: dont need format /dev/block/private
     
187. [    3.980774] init: do_umount: /databk
     
188. [    4.120538] failed to get gpio_para used information
     
189. [    4.132477] [sunxi_leds_init] request gpio188 failed
     
190. [    4.414709] init: untracked pid 1104 exited
     
191. [    4.430680] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
     
192. [    4.446873] android_usb: already disabled
     
193. [    4.452304] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
     
194. [    4.465008] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
     
195. [    4.475660] init: C_IN_START
     
196. [    4.478700] init: path = /dev/block/data
     
197. [    4.484189] init: C_IN_START
     
198. [    4.488762] init: path = /dev/block/cache
     
199. [   11.345102] sunxi_rtc_gettime(34): err, losc_err_flag is 1

复制代码