Cubietruck A20主板不能使用lubuntu开机

oper · 发表于 2014-1-20 13:02:25

1 主板: Cubieboard3 (Cubietruck A20)
fireware: ct_lubuntu_desktop_v1.00/ ct_lubuntu_server_v1.00
刷机: PhoenixSuit 1.06 / 1.07/1.08

2.参考 :http://docs.cubieboard.org/tutor ... _installation_v1.00 /http://www.89idea.com/blog/?p=407
下载 ct-lubuntu-desktop-20131026 or ct-lubuntu-server-20131026 image
3。然后用PhoenixSuit刷Cubietruck A20主板

4. 刷机後黑屏/沒有畫面

5 刷回android,可以正常開啟(出現以下畫面)

cubieplayer · 发表于 2014-1-20 13:36:16

你确定刷机成功了？

oper · 发表于 2014-1-20 14:24:17

cubieplayer 发表于 2014-1-20 13:36
你确定刷机成功了？

lubuntu & android同一方法刷机,同樣顯示'upgrade fireware succeed'
刷机OS: windows 7 x64
debug log

00000001 0.00000000 [3948] 496 0000000000000000 ENTER: DllCanUnloadNow
00000002 0.00005060 [3948] 496 0000000000000000 LEAVE: DllCanUnloadNow
00000003 8.45033455 [3948] 5560 0000000000000000 ENTER: DllCanUnloadNow
00000004 8.45042896 [3948] 5560 0000000000000000 LEAVE: DllCanUnloadNow
00000005 14.52390289 [FFFFFA800992C750] WskProIRPGetAddrInfo is called.
00000006 14.52391338 [bind=FFFFFA8009FB5110] Binding reference count++ = 2 (status = 00000000, impersonation= 2).
00000007 14.52391624 [FFFFFA800973CC50] Request reference count++ = 3.
00000008 14.52394199 [FFFFFA800973CC50] RPC method type = 1: rpc-method succeeded, queue to rpc-pending-list.
00000009 14.52394485 [FFFFFA800973CC50] Request reference count-- = 2.
00000010 14.52678585 [FFFFFA800973CC50] WskKnrRpcComplete: rpc calls back for completion.
00000011 14.52679348 [FFFFFA800973CC50] WskKnrCompletePending: complete pending request (rpc=1).
00000012 14.52679920 [FFFFFA800973CC50] Request reference count-- = 1.
00000013 14.52680206 [FFFFFA800973CC50] Request reference count-- = 0.
00000014 14.52682304 [FFFFFA800973CC50] WskKnrCompleteRequest: rpc completion return status = 00000000 (reply=00000000).
00000015 14.52682781 [FFFFFA800973CC50] WskProAPIGetAddressInfo returned addrinfo: [addr=FFFFF8A01AB487A0].
00000016 14.52683163 [bind=FFFFFA8009FB5110] Binding reference count-- = 1.
00000017 14.52683640 [FFFFFA800973CC50] WskKnrCompleteRequest: complete irp with IO status = 00000000.
00000018 14.52772713 [addr=FFFFF8A01AB487A0] WskProAPIFreeAddressInfo freed addrinfo.
00000019 16.78738403 [5856] Img_OpenItem now!
00000020 16.78742218 [5856] Img_OpenItem[PXTOOLSB][XXXXXXXXXXXXXXXX]
00000021 16.79947662 [5856] Closing image now!
00000022 16.80052185 [5856] CloseImage OK
00000023 22.61552620 [3800] In WM_DEVICECHANGE
00000024 22.62107658 [5856] IN 1
00000025 22.64916992 [5856] PnpFelIn  current m_tools_if is NULL
00000026 22.64971924 [5856] Img_OpenItem now!
00000027 22.64976120 [5856] Img_OpenItem[PXTOOLSB][XXXXXXXXXXXXXXXX]
00000028 22.65061951 [5856] Closing image now!
00000029 22.65067291 [5856] CloseImage OK
00000030 22.65383530 [5856] Img_OpenItem now!
00000031 22.65387726 [5856] Img_OpenItem[COMMON  ][SYS_CONFIG100000]
00000032 22.66333961 [5856] Cfg storage type is 0.
00000033 22.66359329 [5856] Img_OpenItem now!
00000034 22.66364098 [5856] Img_OpenItem[12345678][1234567890dlinfo]
00000035 22.67804909 [3800] In WM_DEVICECHANGE
00000036 22.67849541 [2360] WM_DEVICECHANGE KillTimer(20126, 0).
00000037 22.68209457 [5856] Img_OpenItem now!
00000038 22.68213081 [5856] Img_OpenItem[12345678][1234567890___mbr]
00000039 22.69022179 [5856] MemSz=0x100000 , itemlen 0x10000
00000040 22.69033432 [5856] =============sys_config==========
00000041 22.69036293 [5856] =======<Tools updated at [1/6/2013] by Sam.Wu, check if fes version at least 096>=====
00000042 22.69040489 [5856] dram->reallen = 0x0
00000043 22.69043732 [5856] -------sys_config------
00000044 22.69047356 [5856] sys_config_t_size  = 0x2780
00000045 22.69051170 [5856] version          = 0x100
00000046 22.69055557 [5856] magic             = 20090319
00000047 22.69059372 [5856]
00000048 22.69062805 [5856] magic             = SYS_PARA
00000049 22.69066811 [5856] ver             = 256
00000050 22.69070625 [5856] enable_erase_nand  = 0
00000051 22.69074059 [5856] enable_jtag       = 0
00000052 22.69078255 [5856] ----------------epos_para-------------
00000053 22.69082451 [5856] chip    =0
00000054 22.69086647 [5856] pid       =0
00000055 22.69089699 [5856] sid       =0
00000056 22.69092941 [5856] bid       =0
00000057 22.69096184 [5856] target.debugenable  =0
00000058 22.69100189 [5856] target.burnClk    =720
00000059 22.69103432 [5856]
00000060 22.69103432 [5856] ---------dram_para-----------
00000061 22.69107437 [5856] dram_baseaddr    = 0x40000000
00000062 22.69111061 [5856] dram_clk       = 432
00000063 22.69114113 [5856] dram_type       = 3
00000064 22.69117165 [5856] dram_rank_num    = -1
00000065 22.69120598 [5856] dram_chip_density = -1
00000066 22.69123840 [5856] dram_io_width    = -1
00000067 22.69126892 [5856] dram_bus_width = -1
00000068 22.69130516 [5856] dram_cas       = 9
00000069 22.69133377 [5856] dram_zq          = 0x7f
00000070 22.69136810 [5856] dram_odt_en    = 0
00000071 22.69140053 [5856] dram_size       = -1
00000072 22.69144058 [5856] dram_tpr0       = 0x42d899b7
00000073 22.69147110 [5856] dram_tpr1       = 0xa090
00000074 22.69151497 [5856] dram_tpr2       = 0x22a00
00000075 22.69154549 [5856] dram_tpr3       = 0x0
00000076 22.69158173 [5856] dram_tpr4       = 0x1
00000077 22.69161987 [5856] dram_tpr5       = 0x0
00000078 22.69165039 [5856] dram_emr1       = 0x4
00000079 22.69169807 [5856] dram_emr2       = 0x10
00000080 22.69171715 [5856] dram_emr3       = 0x0
00000081 22.69175148 [5856]
00000082 22.69178963 [5856] p1_para->Battery_cap = 0
00000083 22.69182777 [5856] p1_para->Discharge_current_rate = 0
00000084 22.69185829 [5856]
00000085 22.69189453 [5856]
00000086 22.69193268 [5856] ---------------boot_extend------------------
00000087 22.69196701 [5856] sys_config_para->vol_threshold = 0
00000088 22.69199753 [5856]
00000089 22.69203186 [5856]
00000090 22.69203186 [5856] ----------product_para---------
00000091 22.69207191 [5856] magic = (null)
00000092 22.69210243 [5856] ver = 0
00000093 22.69213867 [5856] size  = 0
00000094 22.69217110 [5856] magic =
00000095 22.69220543 [5856] magic =
00000096 22.69224358 [5856]
00000097 22.69224358 [5856] ----------part_para---In [KBtes]------
00000098 22.69227600 [5856] ///////////max part number is 32. , configured part is 2.
00000099 22.69230652 [5856] mbr_size    = 16384
00000100 22.69234276 [5856] part_num    = 2
00000101 22.69237709 [5856] [part0]
00000102 22.69240761 [5856] lenhi       = 0KB
00000103 22.69244576 [5856] lenlo       = 65536KB
00000104 22.69248390 [5856] classname = DISK
00000105 22.69251633 [5856] name       = bootloader
00000106 22.69254684 [5856] user_type = 0
00000107 22.69258118 [5856] ro          = 0
00000108 22.69261360 [5856] [part1]
00000109 22.69264793 [5856] lenhi       = 0KB
00000110 22.69268227 [5856] lenlo       = 2097152KB
00000111 22.69271469 [5856] classname = DISK
00000112 22.69275475 [5856] name       = rootfs
00000113 22.69278717 [5856] user_type = 0
00000114 22.69282150 [5856] ro          = 0
00000115 22.69285583 [5856]
00000116 22.69285583 [5856] ----------down_para---------
00000117 22.69289207 [5856] /////////max downLoad items is 32. , configured downLoad is 2.
00000118 22.69292831 [5856] down_num    = 2
00000119 22.69296265 [5856] [download_para0]
00000120 22.69299316 [5856] part_name    = bootloader
00000121 22.69302750 [5856] pkt_name    = BOOTLOADER_FEX00
00000122 22.69306564 [5856] verify_file = VBOOTLOADER_FEX0
00000123 22.69309807 [5856] encrypt       = 0
00000124 22.69313812 [5856] [download_para1]
00000125 22.69317055 [5856] part_name    = rootfs
00000126 22.69320869 [5856] pkt_name    = ROOTFS_FEX000000
00000127 22.69324112 [5856] verify_file = VROOTFS_FEX00000
00000128 22.69327545 [5856] encrypt       = 0
00000129 22.69331360 [5856]
00000130 22.69331360 [5856] ---uart para---
00000131 22.69334602 [5856] uart_debug_port = 0.
00000132 22.69338417 [5856] uart_debug_tx = port:pB22<2><1><-1><-1>.
00000133 22.69341850 [5856]
00000134 22.69341850 [5856] ----------fex misc---------
00000135 22.69344902 [5856] restore = 0
00000136 22.69348526 [5856] env_pkt = 0
00000137 22.69351768 [5856] storage_type = 0.
00000138 22.69351768 [5856]
00000139 22.69354820 [5856]
00000140 22.69358253 [5856] ============================================
00000141 22.69361877 [5856] Closing image now!
00000142 22.69368172 [5856] CloseImage OK
00000143 22.76679230 [5856] ********* before Fel2Fes *********
00000144 22.80245781 [5856] down and run fes1-1
00000145 22.82043648 [5856] Img_OpenItem now!
00000146 22.82048416 [5856] Img_OpenItem[FES    ][FES_1-1000000000]
00000147 23.37654495 [5856] down and run fes1-2
00000148 23.39442253 [5856] Clear dram log OK.
00000149 23.39446831 [5856] Img_OpenItem now!
00000150 23.39451599 [5856] Img_OpenItem[FES    ][FES_1-2000000000]
00000151 23.41946411 [5856] DOWN FES1_dram OK
00000152 23.95748711 [5856] update dram size to 2048MB
00000153 23.95753098 [5856] RUN fes1-2 OK.
00000154 24.03043365 [5856] INFO: Simple Test for Dram is OK.
00000155 24.03048325 [5856]
00000156 24.03048325 [5856]  INFO: dram initialize successful
00000157 24.03048325 [5856]
00000158 24.03052902 [5856] fel other=0xec6fe0
00000159 24.03057861 [5856] OS SourceCodePage = 950
00000160 24.67170906 [2360] hkcmd ---In WM_DEVICECHANGE
00000161 24.67177773 [2360] hkcmd ---TVwizard not Enabled
00000162 27.07314110 [5856] user choose to erase=1
00000163 27.09051514 [5856] Img_OpenItem now!
00000164 27.09056854 [5856] Img_OpenItem[FES    ][FES_000000000000]
00000165 27.34154892 [5856] Img_OpenItem now!
00000166 27.34159470 [5856] Img_OpenItem[FES    ][FES_200000000000]
00000167 27.36443901 [5856] INFO: run fes2
00000168 27.37642097 [5856] Closing image now!
00000169 27.37648582 [5856] CloseImage OK

oper · 发表于 2014-1-20 14:24:45

Debug log2

00000170 27.37654877 [5856] *********** after Fel2Fes *********
00000171 28.12318993 [3800] In WM_DEVICECHANGE
00000172 28.16380501 [5856] OUT 1
00000173 30.09369659 [2360] hkcmd ---In WM_DEVICECHANGE
00000174 30.09376335 [2360] hkcmd ---TVwizard not Enabled
00000175 32.38571548 [5856] IN 1
00000176 32.38808441 [5856] Wait for fes device in time
00000177 32.39509583 [5856] Tools get size of image C:\Users\Administrator\Desktop\hdmi\lubuntu-server-nand.img
00000178 32.39521027 [5856] ^^Locale string of English_United States.437 is supported.
00000179 32.39536285 [5856] File Size High is 0X0Bytes, Low is 0X3FA90400Bytes.
00000180 32.39699936 [5856] ID=2, fes_thread() : --162--
00000181 32.39712524 [5856] δ֪Tools\C3\FC\C1\EE
00000182 32.39722443 [5856] ****eraseflag = 1****.
00000183 32.39990997 [3800] In WM_DEVICECHANGE
00000184 32.40004349 [5856] Img_OpenItem now!
00000185 32.40013885 [5856] Img_OpenItem[FET    ][MAGIC_DE_START_0]
00000186 32.41280365 [5856] Img_OpenItem now!
00000187 32.41285324 [5856] Img_OpenItem[FED    ][FED_NAND_0000000]
00000188 33.26168060 [5856] Img_OpenItem now!
00000189 33.26173019 [5856] Img_OpenItem[FET    ][MAGIC_DE_END_000]
00000190 33.28918839 [5856] Info: _step_6_fed_nand() : To run & reg fed.
00000191 34.37496948 [2360] hkcmd ---In WM_DEVICECHANGE
00000192 34.37504196 [2360] hkcmd ---TVwizard not Enabled
00000193 58.42257309 [3948] 5752 0000000000000000 ENTER: DllCanUnloadNow
00000194 58.42261505 [3948] 5752 0000000000000000 LEAVE: DllCanUnloadNow
00000195 58.42288208 [3948] ShellStreams: Detach
00000196 61.61894989 [5856] DISK_SIZE High(0X0Sec), Low(0XE40000Sec), UDisk size High(0X0Sec), Low(0XA18000Sec).
00000197 61.61899567 [5856]
00000198 61.61904144 [5856] ===============mbr_info====================
00000199 61.61907578 [5856] mbr_info->version    = 0x200
00000200 61.61912155 [5856] mbr_info->magic       = softw411
00000201 61.61917496 [5856] mbr_info->copy       = 0x4
00000202 61.61923218 [5856] mbr_info->index       = 0x0
00000203 61.61928558 [5856] mbr_info->PartCount    = 0x3
00000204 61.61932373 [5856] mbr_info->array[0].addrhi    = 0x0
00000205 61.61936951 [5856] mbr_info->array[0].addrlo    = 0x8000
00000206 61.61941528 [5856] mbr_info->array[0].lenhi    = 0x0
00000207 61.61946487 [5856] mbr_info->array[0].lenlo    = 0x20000
00000208 61.61950302 [5856] mbr_info->array[0].classname = DISK
00000209 61.61954880 [5856] mbr_info->array[0].name       = bootloader
00000210 61.61959457 [5856] mbr_info->array[0].user_type = 0
00000211 61.61964417 [5856] mbr_info->array[0].ro       = 0
00000212 61.61968231 [5856] mbr_info->array[1].addrhi    = 0x0
00000213 61.61972809 [5856] mbr_info->array[1].addrlo    = 0x28000
00000214 61.61977386 [5856] mbr_info->array[1].lenhi    = 0x0
00000215 61.61982346 [5856] mbr_info->array[1].lenlo    = 0x400000
00000216 61.61986160 [5856] mbr_info->array[1].classname = DISK
00000217 61.61990738 [5856] mbr_info->array[1].name       = rootfs
00000218 61.61995316 [5856] mbr_info->array[1].user_type = 0
00000219 61.61999512 [5856] mbr_info->array[1].ro       = 0
00000220 61.62004089 [5856] mbr_info->array[2].addrhi    = 0x0
00000221 61.62008667 [5856] mbr_info->array[2].addrlo    = 0x428000
00000222 61.62013245 [5856] mbr_info->array[2].lenhi    = 0x0
00000223 61.62017441 [5856] mbr_info->array[2].lenlo    = 0xa18000
00000224 61.62021637 [5856] mbr_info->array[2].classname = DISK
00000225 61.62026596 [5856] mbr_info->array[2].name       = UDISK
00000226 61.62031174 [5856] mbr_info->array[2].user_type = 0
00000227 61.62035370 [5856] mbr_info->array[2].ro       = 0
00000228 61.62039948 [5856] ===============mbr_info====================
00000229 61.62044525 [5856]
00000230 61.62073517 [5856] ID=2, fes_thread() : --163--
00000231 61.62083435 [5856] δ֪Tools\C3\FC\C1\EE
00000232 61.62090302 [5856] Img_OpenItem now!
00000233 61.62094498 [5856] Img_OpenItem[RFSFAT16][BOOTLOADER_FEX00]
00000234 61.62100220 [5856] id[2]:part_name = bootloader, packet_len_high = 0x0, packet_len_low = 0xA57C00, pkt_name = BOOTLOADER_FEX00, verify_file = VBOOTLOADER_FEX0, encrypt = 0
00000235 61.75434875 [5856] Img_OpenItem now!
00000236 61.75440216 [5856] Img_OpenItem[FET    ][MAGIC_CRC_START_]
00000237 61.75564575 [5856] [fes]: id =2, download_packet ooc Open
00000238 63.43432617 [5856] [fes]: id = 2, download_packet ooc close
00000239 63.44196320 [5856] Img_OpenItem now!
00000240 63.44203568 [5856] Img_OpenItem[FET    ][MAGIC_CRC_EN_000]
00000241 63.44958115 [5856] Img_OpenItem now!
00000242 63.44963455 [5856] Img_OpenItem[RFSFAT16][VBOOTLOADER_FEX0]
00000243 64.54069519 [5856] INFO: ID = 2, pc_crc = 0x3a78819b, fex_crc = 0x0, nand_crc = 0x3a78819b
00000244 64.54074097 [5856] id[2]: down pkt_name(BOOTLOADER_FEX00) to part(bootloader) successful
00000245 64.54074097 [5856]
00000246 64.54087067 [5856] δ֪Tools\C3\FC\C1\EE
00000247 64.54097748 [5856] Img_OpenItem now!
00000248 64.54102325 [5856] Img_OpenItem[RFSFAT16][ROOTFS_FEX000000]
00000249 64.54107666 [5856] id[2]:part_name = rootfs, packet_len_high = 0x0, packet_len_low = 0x3EE00000, pkt_name = ROOTFS_FEX000000, verify_file = VROOTFS_FEX00000, encrypt = 0
00000250 64.67787170 [5856] Img_OpenItem now!
00000251 64.67791748 [5856] Img_OpenItem[FET    ][MAGIC_CRC_START_]
00000252 64.67914581 [5856] [fes]: id =2, download_packet ooc Open
00000253 235.56147766 [5856] [fes]: id = 2, download_packet ooc close
00000254 235.57156372 [5856] Img_OpenItem now!
00000255 235.57160950 [5856] Img_OpenItem[FET    ][MAGIC_CRC_EN_000]
00000256 235.57843018 [5856] Img_OpenItem now!
00000257 235.57850647 [5856] Img_OpenItem[RFSFAT16][VROOTFS_FEX00000]
00000258 339.36187744 [5856] INFO: ID = 2, pc_crc = 0xb2eb5fc2, fex_crc = 0x0, nand_crc = 0xb2eb5fc2
00000259 339.36193848 [5856] id[2]: down pkt_name(ROOTFS_FEX000000) to part(rootfs) successful
00000260 339.36193848 [5856]
00000261 339.36325073 [5856] ID=2, fes_thread() : --167--
00000262 339.36337280 [5856] δ֪Tools\C3\FC\C1\EE
00000263 339.36471558 [5856] Img_OpenItem now!
00000264 339.36474609 [5856] Img_OpenItem[FET    ][MAGIC_CRC_START_]
00000265 339.37182617 [5856] Img_OpenItem now!
00000266 339.37188721 [5856] Img_OpenItem[FET    ][MAGIC_CRC_EN_000]
00000267 339.39755249 [5856] INFO: ID = 2, pc_crc = 0xb093fda4, fex_crc = 0x0, nand_crc = 0xb093fda4
00000268 339.39761353 [5856] un-reg fed with cmd.
00000269 342.10382080 [5856] ID=2, fes_thread() : --161--
00000270 342.10391235 [5856] δ֪Tools\C3\FC\C1\EE
00000271 342.10455322 [5856] Img_OpenItem now!
00000272 342.10461426 [5856] Img_OpenItem[12345678][UBOOT_0000000000]
00000273 342.16644287 [5856] Img_OpenItem now!
00000274 342.16647339 [5856] Img_OpenItem[FET    ][MAGIC_DE_START_0]
00000275 342.16769409 [5856] Img_OpenItem now!
00000276 342.16772461 [5856] Img_OpenItem[FET    ][UPDATE_BOOT1_000]
00000277 343.01922607 [5856] Img_OpenItem now!
00000278 343.01925659 [5856] Img_OpenItem[FET    ][MAGIC_DE_END_000]
00000279 346.29107666 [5856] ID=2, fes_thread() : --160--
00000280 346.29162598 [5856] Img_OpenItem now!
00000281 346.29165649 [5856] Img_OpenItem[BOOT ][BOOT0_0000000000]
00000282 346.29180908 [5856] Img_OpenItem now!
00000283 346.29183960 [5856] Img_OpenItem[FET    ][MAGIC_DE_START_0]
00000284 346.29992676 [5856] Img_OpenItem now!
00000285 346.29995728 [5856] Img_OpenItem[FET    ][MAGIC_DE_END_000]
00000286 346.42819214 [5856] Img_OpenItem now!
00000287 346.42825317 [5856] Img_OpenItem[FET    ][MAGIC_DE_START_0]
00000288 346.42941284 [5856] Img_OpenItem now!
00000289 346.42950439 [5856] Img_OpenItem[FET    ][UPDATE_BOOT0_000]
00000290 347.11721802 [5856] Img_OpenItem now!
00000291 347.11724854 [5856] Img_OpenItem[FET    ][MAGIC_DE_END_000]
00000292 347.54571533 [5856] ID=2, fes_thread() : --168--
00000293 347.54745483 [5856] δ֪Tools\C3\FC\C1\EE
00000294 347.54983521 [5856] ID=2, fes_thread() : --190--
00000295 347.54986572 [5856] Img_OpenItem now!
00000296 347.54992676 [5856] Img_OpenItem[FET    ][MAGIC_DE_START_0]
00000297 347.55117798 [5856] Img_OpenItem now!
00000298 347.55123901 [5856] Img_OpenItem[FET    ][FET_RESTORE_0000]
00000299 347.55694580 [5856] Img_OpenItem now!
00000300 347.55697632 [5856] Img_OpenItem[FET    ][MAGIC_DE_END_000]
00000301 347.58255005 [5856] Closing image now!
00000302 347.58264160 [5856] CloseImage OK
00000303 347.58331299 [5856]
00000304 347.58331299 [5856] INFO: ID=2, update successful
00000305 347.58331299 [5856]
00000306 348.25320435 [3800] In WM_DEVICECHANGE
00000307 348.29287720 [5856] OUT 1
00000308 350.22573853 [2360] hkcmd ---In WM_DEVICECHANGE
00000309 350.22576904 [2360] hkcmd ---TVwizard not Enabled

wwant · 发表于 2014-1-24 18:55:20

你用TTL 线也不能串口登陆么

killercat · 发表于 2014-2-7 15:45:57

你用的是什么接口？hdmi 和 vga 接口的固件不一样。看看是不是这个出了问题。我刷 hdmi 的固件是可以的固件是 lubuntu v1.01

oper · 发表于 2014-2-7 15:55:39

killercat 发表于 2014-2-7 15:45
你用的是什么接口？hdmi 和 vga 接口的固件不一样。看看是不是这个出了问题。我刷 hdmi 的固件是可以的固 ...

hdmi 和 vga同樣都是黑屏........

oper · 发表于 2014-2-7 15:57:54

本帖最后由 oper 于 2014-2-7 16:40 编辑

大大的Drivers是裝那一個?
AllWinnertech\PhoenixSuit\Drivers有二個ADB_Driver & AW_Driver

killercat · 发表于 2014-2-7 17:51:18

本帖最后由 killercat 于 2014-2-7 20:59 编辑

我用的固件 http://dl.cubieboard.org/software/a20-cubietruck/lubuntu/ct-lubuntu-nand-v1.01/ct-lubuntu-server/lubuntu-server-nand.img.gz
另外我用的是 livesuit（在 MacOS 下刷的），貌似直接就弄好了，没什么 Drivers。

oper · 发表于 2014-2-8 08:52:05

killercat 发表于 2014-2-7 17:51
我用的固件 http://dl.cubieboard.org/software/a20-cubietruck/lubuntu/ct-lubuntu-nand-v1.01/ct-lubuntu ...

所有linux固件(ubuntu, fedora , archlinux)都刷過,都是黑屏

只有android 正常顯示

		自动登录	找回密码
密码			立即注册

Cubietruck A20主板不能使用lubuntu开机

布