[转发]成功为cubieboard编译XBMC

WindLand

帖子见google论坛：  
https://groups.google.com/forum/m/#!topic/cubieboard/AIXGspxm05s

WindLand

为了方便某些长城后面地区的朋友，先将帖子关键部分转过来：

IT IS WORKING!!!

Many thanks again Dmitriy! I would have searched at least a week more finding the fixes for the Problems without your help!!

I Compiled (almost) like the sunxi-tutorial ,and now it runs quite smooth!

here are all the steps i took in orderto make it work

root@mele:~/# apt-get update
root@mele:~/# apt-get upgrade
root@mele:~/# apt-get install git

root@mele:~/# mkdir melehacking
root@mele:~/# cd melehacking
root@mele:~/melehacking# git clone git://github.com/rellla/xbmca10.git
root@mele:~/melehacking# apt-get build-dep xbmc
root@mele:~/melehacking# apt-get install swig default-jre cmake libgtk2.0-bin

#install missing extra build dependency (before 1. make)
apt-get install  libssh-4  libssh-dev

root@mele:~/melehacking# apt-get remove libegl1-mesa libegl1-mesa-dev libegl1-mesa-drivers libgles2-mesa

libgles2-mesa-dev

root@mele:~/melehacking# dd if=/dev/zero of=/swap bs=1M count=384
root@mele:~/melehacking# mkswap -c /swap
root@mele:~/melehacking# swapon /swap

root@mele:~/melehacking# cd xbmca10/tools/a10/depends
root@mele:~/melehacking/xbmca10/tools/a10/depends# make
# needed to install wget at this point and retry...(apt-get install wget)

#-->root@mele:/allwinner/xbmc-pvr-bin/lib/xbmc# echo -e "\nA10HWR=1" >> /etc/environment<--
#this line only adds a variable to /etc/environment and doesent need to be executed from this (non-

#existing)path, so:

echo -e "\nA10HWR=1" >> /etc/environment
root@mele:~/melehacking/xbmca10/tools/a10/depends# make -C xbmc
root@mele:~/melehacking/xbmca10/tools/a10/depends# cd ../../../
root@mele:~/melehacking/xbmca10# make install

root@mele:~/melehacking/xbmca10/tools/a10/depends# cd package
root@mele:~/melehacking/xbmca10/tools/a10/depends/package# make


#RUNNING XBMC

#1.Prevent X-server from running

mv /ext/init/lightdm.config /etc/init/lightdm.config.noboot

#Change rights for drivers


chmod 777 /dev/ump
chmod 777 /dev/mali

#reboot once
#startXBMC AS SUDO!

sudo ./allwinner/xbmc-pvr-binhf/lib/xbmc/xbmc.bin

#I got only video output on my tv , not on monitor!!



Regards , Martin

aiyanxu

GFW 伤不起，不过google group 可以通过修改hosts访问

netjedi

mele, 迈乐的员工?

刚好在春节前入了迈乐的a200. 也是全志a10方案的android播放器, 放假回来升级系统后装了android版的xbmc, 播放sd卡上的视频没问题. 不值到时能刷个xmbc版的linux不, android起动还是有点慢.

pizzro

我用debian 来播放mplayer 但是发现不能 -fs 参数 加了没有 就界面全屏了。但是视频内容没有放大
。另外一种方法 用 -zoom 参数。 视频内容是可以放大。但是非常的卡。
我用的屏幕是 23寸的 1960*1000的分辨率。
是不是有可能屏幕过大。导致播放消耗太多的资源而卡。正常大小 比如800*600的时候播放正常
难道视频播放器不能自动更改分辨率的吗

aaron

在make时候：
tar: linux-sunxi-cedarx-libs-b8f52d9/old/a10_h264_encode/doc/H264encLib\347\256\200\350\246\201\350\257\264\346\230\216.doc: Cannot open: Invalid argument
请问版主这是什么原因 ？

aaron

http://linux-sunxi.org/More-images
关于这2个镜像
xbmc_wheezy_3.0.62_server1G.7z.001
xbmc_wheezy_3.0.62_server1G.7z.002
我在尝试在Cubieboard A10上跑，
sudo dd if=sunxi-spl.bin of=/dev/sdb bs=1024 seek=8
sudo dd if=u-boot.bin of=/dev/sdb bs=1024 seek=32
之后怎样把镜像写进去？

aaron

aaron 发表于 2013-10-15 11:41
在make时候：
tar: linux-sunxi-cedarx-libs-b8f52d9/old/a10_h264_encode/doc/H264encLib\347\256\200\350 ...

linux-sunxi-cedarx-libs-b8f52d9/libcedarv/linux-armel2/sample/doc/init data\350\256\276\347\275\256\346\214\207\345\257\274.doc
tar: linux-sunxi-cedarx-libs-b8f52d9/libcedarv/linux-armel2/sample/doc/init data\350\256\276\347\275\256\346\214\207\345\257\274.doc: Cannot open: Invalid argument

dj5443

xbmc能跑起来，但airplay好像用不起来啊，LZ有试过用手机通过airplay给ct传视频吗？
ps：我用的lubuntu系统，板子是cubietruck