设为首页CubieBoard博客-HomeCubieTech公司网站收藏本站
切换到宽版

CubieBoard中文论坛

 找回密码
 立即注册
搜索
热搜: unable
CubieBoard中文论坛»论坛 › 上手使用 › 上手问题 › CT刷了官方lubuntu wifi启用不了。。。
返回列表 发新帖
查看: 11968|回复: 9

CT刷了官方lubuntu wifi启用不了。。。

[复制链接]
gsoft
发表于 2013-10-25 21:36:21 | 显示全部楼层 |阅读模式

刷的这个 ct-lubuntu-desktop-nand-20131023.img  

敲了这个命令 modprobe bcmdhd

  2. General error mounting filesystems.
  3. A maintenance shell will now be started.
  4. CONTROL-D will terminate this shell and reboot the system.
  5. bash: groups: command not found
  6. root@(none):~# ls
  7. debs
  8. root@(none):~# cd PHY_PageRead : too much ecc err,bank 0 block 74a,page 4
  9. [   32.851281] PHY_PageRead : too much ecc err,bank 0 block 74a,page 4
  10. root@(none):/home# ls
  11. linaro
  12. root@(none):/home# modprobe bcmdhd
  13. <6>bcmdhd: got gpio2, mapped to irqno170
  14. [  396.203844] bcmdhd: got gpio2, mapped to irqno170
  15. dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON
  16. [  396.221481] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON
  17. [wifi_pm]: No select wifi, please check your config !!
  18. [  396.240652] [wifi_pm]: No select wifi, please check your config !!
  19. <6>[mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  20. [  396.261008] [mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  21. <6>[mmc-msg] sdc3 power on
  22. [  396.309934] [mmc-msg] sdc3 power on
  23. <6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  24. [  396.365864] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  25. <6>[mmc-msg] sdc3 set round clock 400000, src 24000000
  26. [  396.412387] [mmc-msg] sdc3 set round clock 400000, src 24000000
  27. =========== WLAN placed in POWER ON ========

  29. [  403.246573] =========== WLAN placed in POWER OFF ========
  30. dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON
  31. [  403.264831] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON
  32. [wifi_pm]: No select wifi, please check your config !!
  33. [  403.283870] [wifi_pm]: No select wifi, please check your config !!
  34. <6>[mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  35. [  403.303888] [mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  36. <6>[mmc-msg] sdc3 power on
  37. [  403.339920] [mmc-msg] sdc3 power on
  38. <6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  39. [  403.395826] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  40. <6>[mmc-msg] sdc3 set round clock 400000, src 24000000
  41. [  403.442393] [mmc-msg] sdc3 set round clock 400000, src 24000000
  42. =========== WLAN placed in POWER ON ========
  43. [  403.504178] =========== WLAN placed in POWER ON ========
  44. <3>[mmc-err] smc 3 err, cmd 52,  RTO
  45. [  403.549653] [mmc-err] smc 3 err, cmd 52,  RTO
  46. <3>[mmc-err] smc 3 err, cmd 52,  RTO
  47. [  403.564153] [mmc-err] smc 3 err, cmd 52,  RTO
  48. <6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  49. [  403.582761] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  50. <6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  51. [  403.610275] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  52. <3>[mmc-err] smc 3 err, cmd 8,  RTO
  53. [  403.630825] [mmc-err] smc 3 err, cmd 8,  RTO
  54. <3>[mmc-err] smc 3 err, cmd 5,  RTO
  55. [  403.644794] [mmc-err] smc 3 err, cmd 5,  RTO
  56. <3>[mmc-err] smc 3 err, cmd 5,  RTO
  57. [  403.658581] [mmc-err] smc 3 err, cmd 5,  RTO
  58. <3>[mmc-err] smc 3 err, cmd 5,  RTO
  59. [  403.672167] [mmc-err] smc 3 err, cmd 5,  RTO
  60. <3>[mmc-err] smc 3 err, cmd 5,  RTO
  61. [  403.685596] [mmc-err] smc 3 err, cmd 5,  RTO
  62. <3>[mmc-err] smc 3 err, cmd 55,  RTO
  63. [  403.699004] [mmc-err] smc 3 err, cmd 55,  RTO
  64. <3>[mmc-err] smc 3 err, cmd 55,  RTO
  65. [  403.712380] [mmc-err] smc 3 err, cmd 55,  RTO
  66. <3>[mmc-err] smc 3 err, cmd 55,  RTO
  67. [  403.725766] [mmc-err] smc 3 err, cmd 55,  RTO
  68. <3>[mmc-err] smc 3 err, cmd 55,  RTO
  69. [  403.738941] [mmc-err] smc 3 err, cmd 55,  RTO
  70. <6>[mmc-msg] sdc3 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  71. [  403.756314] [mmc-msg] sdc3 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  72. <3>[mmc-err] smc 3 err, cmd 1,  RTO
  73. [  403.774609] [mmc-err] smc 3 err, cmd 1,  RTO
  74. <6>[mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  75. [  403.791744] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  76. <6>[mmc-msg] sdc3 power off
  77. [  403.808541] [mmc-msg] sdc3 power off
  78. PHY_PageRead : too much ecc err,bank 0 block 74a,page c
  79. [  404.080377] PHY_PageRead : too much ecc err,bank 0 block 74a,page c

  81. failed to power up wifi chip, retry again (1 left) **

  83. [  405.512633]
  84. [  405.512641] failed to power up wifi chip, retry again (1 left) **
  85. [  405.512648]
  86. dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn off WL_REG_ON
  87. [  405.545471] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn off WL_REG_ON
  88. [wifi_pm]: No select wifi, please check your config !!
  89. [  405.564700] [wifi_pm]: No select wifi, please check your config !!
  90. =========== WLAN placed in POWER OFF ========
  91. [  405.581022] =========== WLAN placed in POWER OFF ========

  93. failed to power up wifi chip, max retry reached, exits **

  95. [  405.597809]
  96. [  405.597814] failed to power up wifi chip, max retry reached, exits **
  97. [  405.597821]
  98. FATAL: Error inserting bcmdhd (/lib/modules/3.4.61+/kernel/drivers/net/wireless/bcmdhd/bcmdhd.ko): No such device
  99. root@(none):/home#
复制代码
回复

使用道具 举报

97660511
发表于 2013-11-9 19:10:41 | 显示全部楼层
遇到了同样的问题
回复 支持 反对

使用道具 举报

97660511
发表于 2013-11-9 19:17:42 | 显示全部楼层
[  182.766896] bcmdhd: got gpio2, mapped to irqno170
[  182.774669] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON
[  182.782199] [wifi_pm]: No select wifi, please check your config !!
[  182.791782] [mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  182.801878] [mmc-msg] sdc3 power on
[  182.827768] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  182.832685] [mmc-msg] sdc3 set round clock 400000, src 24000000
[  182.904062] =========== WLAN placed in POWER ON ========
[  182.925203] [mmc-err] smc 3 err, cmd 52,  RTO
[  182.933909] [mmc-err] smc 3 err, cmd 52,  RTO
[  182.946779] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  182.958159] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  182.969865] [mmc-err] smc 3 err, cmd 8,  RTO
[  182.978348] [mmc-err] smc 3 err, cmd 5,  RTO
[  182.986950] [mmc-err] smc 3 err, cmd 5,  RTO
[  182.995422] [mmc-err] smc 3 err, cmd 5,  RTO
[  183.004003] [mmc-err] smc 3 err, cmd 5,  RTO
[  183.012545] [mmc-err] smc 3 err, cmd 55,  RTO
[  183.021531] [mmc-err] smc 3 err, cmd 55,  RTO
[  183.030182] [mmc-err] smc 3 err, cmd 55,  RTO
[  183.039120] [mmc-err] smc 3 err, cmd 55,  RTO
[  183.051988] [mmc-msg] sdc3 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  183.056382] [mmc-err] smc 3 err, cmd 1,  RTO
[  183.068788] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  183.071324] [mmc-msg] sdc3 power off
[  184.904656]
[  184.904663] failed to power up wifi chip, retry again (4 left) **
[  184.904669]
[  184.912452] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn off WL_REG_ON
[  184.919834] [wifi_pm]: No select wifi, please check your config !!
[  184.924759] =========== WLAN placed in POWER OFF ========
[  184.932199] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON
[  184.938877] [wifi_pm]: No select wifi, please check your config !!
[  184.946854] [mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  184.961864] [mmc-msg] sdc3 power on
[  184.987794] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  184.992712] [mmc-msg] sdc3 set round clock 400000, src 24000000
[  185.059580] =========== WLAN placed in POWER ON ========
[  185.085145] [mmc-err] smc 3 err, cmd 52,  RTO
[  185.093838] [mmc-err] smc 3 err, cmd 52,  RTO
[  185.106711] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  185.118901] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  185.124605] [mmc-err] smc 3 err, cmd 8,  RTO
[  185.133175] [mmc-err] smc 3 err, cmd 5,  RTO
[  185.141650] [mmc-err] smc 3 err, cmd 5,  RTO
[  185.150504] [mmc-err] smc 3 err, cmd 5,  RTO
[  185.158972] [mmc-err] smc 3 err, cmd 5,  RTO
[  185.167722] [mmc-err] smc 3 err, cmd 55,  RTO
[  185.176350] [mmc-err] smc 3 err, cmd 55,  RTO
[  185.185163] [mmc-err] smc 3 err, cmd 55,  RTO
[  185.193823] [mmc-err] smc 3 err, cmd 55,  RTO
[  185.206673] [mmc-msg] sdc3 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  185.211091] [mmc-err] smc 3 err, cmd 1,  RTO
[  185.223500] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  185.226388] [mmc-msg] sdc3 power off
[  187.064619]
[  187.064628] failed to power up wifi chip, retry again (3 left) **
[  187.064634]
[  187.072429] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn off WL_REG_ON
[  187.079136] [wifi_pm]: No select wifi, please check your config !!
[  187.083299] =========== WLAN placed in POWER OFF ========
[  187.091508] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON
[  187.097671] [wifi_pm]: No select wifi, please check your config !!
[  187.105644] [mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  187.111933] [mmc-msg] sdc3 power on
[  187.137797] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  187.142708] [mmc-msg] sdc3 set round clock 400000, src 24000000
[  187.224385] =========== WLAN placed in POWER ON ========
[  187.235211] [mmc-err] smc 3 err, cmd 52,  RTO
[  187.243884] [mmc-err] smc 3 err, cmd 52,  RTO
[  187.256780] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  187.268840] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  187.274104] [mmc-err] smc 3 err, cmd 8,  RTO
[  187.282551] [mmc-err] smc 3 err, cmd 5,  RTO
[  187.291293] [mmc-err] smc 3 err, cmd 5,  RTO
[  187.299742] [mmc-err] smc 3 err, cmd 5,  RTO
[  187.308545] [mmc-err] smc 3 err, cmd 5,  RTO
[  187.317371] [mmc-err] smc 3 err, cmd 55,  RTO
[  187.325986] [mmc-err] smc 3 err, cmd 55,  RTO
[  187.334910] [mmc-err] smc 3 err, cmd 55,  RTO
[  187.343539] [mmc-err] smc 3 err, cmd 55,  RTO
[  187.356356] [mmc-msg] sdc3 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  187.360828] [mmc-err] smc 3 err, cmd 1,  RTO
[  187.374813] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  187.377758] [mmc-msg] sdc3 power off
[  189.224587]
[  189.224594] failed to power up wifi chip, retry again (2 left) **
[  189.224601]
[  189.232211] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn off WL_REG_ON
[  189.244966] [wifi_pm]: No select wifi, please check your config !!
[  189.253745] =========== WLAN placed in POWER OFF ========
[  189.261362] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON
[  189.271843] [wifi_pm]: No select wifi, please check your config !!
[  189.279890] [mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  189.291906] [mmc-msg] sdc3 power on
[  189.317826] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  189.322745] [mmc-msg] sdc3 set round clock 400000, src 24000000
[  189.391558] =========== WLAN placed in POWER ON ========
[  189.415217] [mmc-err] smc 3 err, cmd 52,  RTO
[  189.426196] [mmc-err] smc 3 err, cmd 52,  RTO
[  189.441207] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  189.452709] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  189.458178] [mmc-err] smc 3 err, cmd 8,  RTO
[  189.468473] [mmc-err] smc 3 err, cmd 5,  RTO
[  189.478847] [mmc-err] smc 3 err, cmd 5,  RTO
[  189.488911] [mmc-err] smc 3 err, cmd 5,  RTO
[  189.498990] [mmc-err] smc 3 err, cmd 5,  RTO
[  189.509146] [mmc-err] smc 3 err, cmd 55,  RTO
[  189.519420] [mmc-err] smc 3 err, cmd 55,  RTO
[  189.529215] [mmc-err] smc 3 err, cmd 55,  RTO
[  189.539097] [mmc-err] smc 3 err, cmd 55,  RTO
[  189.552944] [mmc-msg] sdc3 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  189.557146] [mmc-err] smc 3 err, cmd 1,  RTO
[  189.575118] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  189.577774] [mmc-msg] sdc3 power off
[  191.394584]
[  191.394591] failed to power up wifi chip, retry again (1 left) **
[  191.394598]
[  191.401669] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn off WL_REG_ON
[  191.406878] [wifi_pm]: No select wifi, please check your config !!
[  191.411057] =========== WLAN placed in POWER OFF ========
[  191.416925]
[  191.416936] failed to power up wifi chip, max retry reached, exits **
[  191.416943]
回复 支持 反对

使用道具 举报

gsoft
 楼主| 发表于 2013-11-9 23:15:20 | 显示全部楼层
97660511 发表于 2013-11-9 19:17
[  182.766896] bcmdhd: got gpio2, mapped to irqno170
[  182.774669] dhd_customer_gpio_wlan_ctrl: cal ...

刷最新的好了。  桌面版是好的。
回复 支持 反对

使用道具 举报

97660511
发表于 2013-11-10 08:33:27 | 显示全部楼层
对的. 桌面版的是可以的.
回复 支持 反对

使用道具 举报

skylee
发表于 2014-2-24 17:17:37 | 显示全部楼层
我也折腾了很长时间，Server版本Wifi启用不了。绝望了，先改为desktop版本试试。
回复 支持 反对

使用道具 举报

shuweicn
发表于 2014-2-24 18:29:44 | 显示全部楼层
同样问题 不想用 desktop 版本的  

fedora mininal 版的都起不来
回复 支持 反对

使用道具 举报

aaron
发表于 2014-2-24 19:43:47 | 显示全部楼层
shuweicn 发表于 2014-2-24 18:29
同样问题 不想用 desktop 版本的  

fedora mininal 版的都起不来

lubuntu -sever 也发布新的版本了
回复 支持 反对

使用道具 举报

popfeng
发表于 2014-2-24 21:46:21 | 显示全部楼层
aaron 发表于 2014-2-24 19:43
lubuntu -sever 也发布新的版本了

你好，我的也是CB3，今天刷的最新系统lubuntu-desktop-nand-hdmi.img.gz,发现无法连接wifi，当我使用命令 iwconfig wlan0 essid "TPLink" key 123456789  无论如何都提示语法错误，您能帮我下吗
回复 支持 反对

使用道具 举报

aaron
发表于 2014-2-25 14:03:12 | 显示全部楼层
你可以试一下把密码取消掉，在运行iwconfig wlan0 essid "TPLink"
回复 支持 反对

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|Archiver|手机版|粤ICP备13051116号|cubie.cc---深刻的嵌入式技术讨论社区

GMT+8, 2024-11-24 02:44 , Processed in 0.024910 second(s), 15 queries .

Powered by Discuz! X3.4

© 2001-2012 Comsenz Inc. | Style by Coxxs

返回顶部