cb-lubuntu-12.10-v1.05固件今天上线

yzbx · 发表于 2013-8-27 15:54:56

本帖最后由 yzbx 于 2013-8-27 19:21 编辑

matson 发表于 2013-8-27 14:48
To use pwm:
$cd /lib/modules/`uname -r`/kernel/drivers/misc
$sudo insmod pwm-sunxi.ko

怎么是在/sys/kernel/下面，记得tll提到的是在/sys/class/目录下，不管怎样，我先试试再说，多谢matson。
（经测试，也是相当好用，先 echo '0 100 2400' > start 再echo '0 2300 2400' > start, 只见LED小灯先暗，然后很明亮，LED灯正极接U14/PB02,负极接GND）

$sudo su - root
#cd /sys/kernel/sunxi_pwm
#echo '0 1200 2400' > start

复制代码

hawkwolf · 发表于 2013-9-1 10:31:25

SSH链接后报错。

zjgaoli888 · 发表于 2013-9-2 16:01:20

这个版本的apt-get install mysql-server怎么装不了啊?

matson · 发表于 2013-9-2 17:27:07

zjgaoli888 发表于 2013-9-2 16:01
这个版本的apt-get install mysql-server怎么装不了啊?

把错误贴出来看一下

zjgaoli888 · 发表于 2013-9-3 01:10:18

matson 发表于 2013-9-2 17:27
把错误贴出来看一下

还有开机的时候
<6>sunxi_emac sunxi_emac.0: eth0: link down
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
要等好久...有什么解决方案么?

zjgaoli888 · 发表于 2013-9-3 10:53:49

matson 发表于 2013-9-2 17:27
把错误贴出来看一下

ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var

cubieboard · 发表于 2013-9-3 12:30:27

zjgaoli888 发表于 2013-9-3 01:10
还有开机的时候
sunxi_emac sunxi_emac.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not rea ...

启动时设置了dhcp eth0，所以如果没有接网线的话会等待超时。
可以把/etc/network/interfaces里面的eth0去掉就好了

matson · 发表于 2013-9-3 12:40:17

zjgaoli888 发表于 2013-9-3 10:53
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var

刚测试，可以用。请把你的板型已经操作步骤贴出来看一看。

root@cubieboard:/etc# apt-get install mysql-server
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  libaio1 libclass-isa-perl libdbd-mysql-perl libdbi-perl libmysqlclient18
  libnet-daemon-perl libplrpc-perl libswitch-perl libterm-readkey-perl
  mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server-5.5
  mysql-server-core-5.5 perl perl-modules
Suggested packages:
  libcompress-zlib-perl tinyca mailx perl-doc libterm-readline-gnu-perl
  libterm-readline-perl-perl make libpod-plainer-perl
Recommended packages:
  libhtml-template-perl
The following NEW packages will be installed:
  libaio1 libclass-isa-perl libdbd-mysql-perl libdbi-perl libmysqlclient18
  libnet-daemon-perl libplrpc-perl libswitch-perl libterm-readkey-perl
  mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server
  mysql-server-5.5 mysql-server-core-5.5 perl perl-modules
0 upgraded, 17 newly installed, 0 to remove and 0 not upgraded.
Need to get 32.3 MB of archives.
After this operation, 111 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
WARNING: The following packages cannot be authenticated!
  libaio1 mysql-common libmysqlclient18 libswitch-perl libclass-isa-perl
  perl-modules perl libnet-daemon-perl libplrpc-perl libdbi-perl
  libdbd-mysql-perl mysql-client-core-5.5 libterm-readkey-perl
Package configuration






            ��Ĵ Configuring mysql-server-5.5 ��ÿ
            �                                           �
            �                                           �
            � Repeat password for the MySQL "root" user:  �
            �                                           �
            � ******_____________________________________ �
            �                                           �
            �                <Ok>                   �
            �                                           �
            ��




Selecting previously unselected package libaio1:armhf.
(Reading database ... 49053 files and directories currently installed.)
Unpacking libaio1:armhf (from .../libaio1_0.3.109-2ubuntu1_armhf.deb) ...
Selecting previously unselected package mysql-common.
Unpacking mysql-common (from .../mysql-common_5.5.27-0ubuntu2_all.deb) ...
Selecting previously unselected package libmysqlclient18:armhf.
Unpacking libmysqlclient18:armhf (from .../libmysqlclient18_5.5.27-0ubuntu2_arm.
Selecting previously unselected package libswitch-perl.
Unpacking libswitch-perl (from .../libswitch-perl_2.16-2_all.deb) ...
Selecting previously unselected package libclass-isa-perl.
Unpacking libclass-isa-perl (from .../libclass-isa-perl_0.36-3_all.deb) ...
Selecting previously unselected package perl-modules.
Unpacking perl-modules (from .../perl-modules_5.14.2-13_all.deb) ...
Selecting previously unselected package perl.
Unpacking perl (from .../perl_5.14.2-13_armhf.deb) ...
Selecting previously unselected package libnet-daemon-perl.
Unpacking libnet-daemon-perl (from .../libnet-daemon-perl_0.48-1_all.deb) ...
Selecting previously unselected package libplrpc-perl.
Unpacking libplrpc-perl (from .../libplrpc-perl_0.2020-2_all.deb) ...
Selecting previously unselected package libdbi-perl.
Unpacking libdbi-perl (from .../libdbi-perl_1.622-1_armhf.deb) ...
Selecting previously unselected package libdbd-mysql-perl.
Unpacking libdbd-mysql-perl (from .../libdbd-mysql-perl_4.021-1_armhf.deb) ...
Selecting previously unselected package mysql-client-core-5.5.
Unpacking mysql-client-core-5.5 (from .../mysql-client-core-5.5_5.5.27-0ubuntu2.
Selecting previously unselected package libterm-readkey-perl.
Unpacking libterm-readkey-perl (from .../libterm-readkey-perl_2.30-4build4_armh.
Selecting previously unselected package mysql-client-5.5.
Unpacking mysql-client-5.5 (from .../mysql-client-5.5_5.5.27-0ubuntu2_armhf.deb.
Selecting previously unselected package mysql-server-core-5.5.
Unpacking mysql-server-core-5.5 (from .../mysql-server-core-5.5_5.5.27-0ubuntu2.
Processing triggers for man-db ...
Setting up mysql-common (5.5.27-0ubuntu2) ...
Selecting previously unselected package mysql-server-5.5.
(Reading database ... 50847 files and directories currently installed.)
Unpacking mysql-server-5.5 (from .../mysql-server-5.5_5.5.27-0ubuntu2_armhf.deb.
Selecting previously unselected package mysql-server.
Unpacking mysql-server (from .../mysql-server_5.5.27-0ubuntu2_all.deb) ...
Processing triggers for man-db ...
Processing triggers for ureadahead ...
Setting up libaio1:armhf (0.3.109-2ubuntu1) ...
Setting up libmysqlclient18:armhf (5.5.27-0ubuntu2) ...
Setting up libclass-isa-perl (0.36-3) ...
Setting up mysql-client-core-5.5 (5.5.27-0ubuntu2) ...
Setting up mysql-server-core-5.5 (5.5.27-0ubuntu2) ...
Setting up libswitch-perl (2.16-2) ...
Setting up perl-modules (5.14.2-13) ...
Setting up perl (5.14.2-13) ...
update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename)e
Setting up libnet-daemon-perl (0.48-1) ...
Setting up libplrpc-perl (0.2020-2) ...
Setting up libdbi-perl (1.622-1) ...
Setting up libdbd-mysql-perl (4.021-1) ...
Setting up libterm-readkey-perl (2.30-4build4) ...
Setting up mysql-client-5.5 (5.5.27-0ubuntu2) ...
Setting up mysql-server-5.5 (5.5.27-0ubuntu2) ...
mysql start/running, process 2631
Processing triggers for ureadahead ...
Setting up mysql-server (5.5.27-0ubuntu2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place

zjgaoli888 · 发表于 2013-9-3 13:42:24

cubieboard 发表于 2013-9-3 12:30
启动时设置了dhcp eth0，所以如果没有接网线的话会等待超时。
可以把/etc/network/interfaces里面的eth0 ...

可以具体一点么

zjgaoli888 · 发表于 2013-9-3 23:21:12

本帖最后由 zjgaoli888 于 2013-9-4 00:09 编辑

matson 发表于 2013-9-3 12:40
刚测试，可以用。请把你的板型已经操作步骤贴出来看一看。

root@cubieboard:/etc# apt-get install mysq ...

a10的板子 , 刚刚刷完这个系统就apt-get install mysql-server 然后到下面就死循环了(红色部分)
Unpacking mysql-server-5.5 (from .../mysql-server-5.5_5.5.27-0ubuntu2_armhf.deb) ...
Selecting previously unselected package mysql-server.
Unpacking mysql-server (from .../mysql-server_5.5.27-0ubuntu2_all.deb) ...
Processing triggers for man-db ...
Processing triggers for ureadahead ...
Setting up libaio1:armhf (0.3.109-2ubuntu1) ...
Setting up libmysqlclient18:armhf (5.5.27-0ubuntu2) ...
Setting up libnet-daemon-perl (0.48-1) ...
Setting up libplrpc-perl (0.2020-2) ...
Setting up libdbi-perl (1.622-1) ...
Setting up libdbd-mysql-perl (4.021-1) ...
Setting up mysql-client-core-5.5 (5.5.27-0ubuntu2) ...
Setting up libterm-readkey-perl (2.30-4build4) ...
Setting up mysql-client-5.5 (5.5.27-0ubuntu2) ...
Setting up mysql-server-core-5.5 (5.5.27-0ubuntu2) ...
Setting up mysql-server-5.5 (5.5.27-0ubuntu2) ...
<4>init: mysql main process (3736) terminated with status 1
<4>init: mysql main process ended, respawning
<4>init: mysql post-start process (3737) terminated with status 1

刚刚测试了下cb_a10_lubuntu12.04_v1.04.img,这个mysql是正常的!

		自动登录	找回密码
密码			立即注册

cb-lubuntu-12.10-v1.05固件今天上线

本帖子中包含更多资源