建置 Android for Cubieboard2，無法開機

sword

我下載了
http://dl.cubieboard.org/model/c ... 0_lichee.git.tar.gz
http://dl.cubieboard.org/model/c ... droid4.2.git.tar.gz

也依 http://docs.cubieboard.org/tutor ... r_own_android_image 步驟建置，也建置及 pack 成功!

1. c:\bat
   
2. c:\magic.bin
   
3. find magic !!
   
4. RealLen=0x4B0C00
   
5. CPlugin Free lib
   
6. CPlugin Free lib
   
7. normal
   
8. dragon image.cfg sys_partition.fex [OK]
   
9. ----------image is at----------
   
10. 
    
11. /home/sword/workspace/cb2/android/a20/lichee/tools/pack/sun7i_android_sugar-cubieboard2.img
    
12. 
    
13. pack finish

复制代码

但用 PhoenixCard.exe 寫入 Micro SD，放入 Cubieboard2 開機，螢幕閃了幾次就變黑屏了! 請問各位大大是否知道如何解決或方向?

謝謝!

bill

你的板子是nand 还是tsd的？

蓝天-彭

先直接烧到板子上看看能不能起来，排除卡的问题

sword

bill 发表于 2016-3-21 09:42
你的板子是nand 还是tsd的？

謝謝您的回覆!

應該是 NAND!

我有試過燒官方的 Android Image 是可以開機的，也確認了 MicroSD 卡及燒錄的步驟應該沒問題!

sword

蓝天-彭 发表于 2016-3-21 10:14
先直接烧到板子上看看能不能起来，排除卡的问题

謝謝您的提醒!

這個沒試過! 今天下班回家再試試!!

sword

sword 发表于 2016-3-21 10:30
謝謝您的提醒!

這個沒試過! 今天下班回家再試試!!

剛燒錄了! 燒我建的 ROM 一樣無畫面，燒官方的 ROM 可成功...

蓝天-彭

sword 发表于 2016-3-21 22:41
剛燒錄了! 燒我建的 ROM 一樣無畫面，燒官方的 ROM 可成功...

那接上串口线看看系统启动log，看看跑到哪里了

sword

蓝天-彭 发表于 2016-3-23 09:40
那接上串口线看看系统启动log，看看跑到哪里了

了解! 目前購買串口設備中...等有進一步結果，再回覆!!!

sword

蓝天-彭 发表于 2016-3-23 09:40
那接上串口线看看系统启动log，看看跑到哪里了

顯示如下訊息

HELLO! BOOT0 is starting!
boot0 version : 3.0.0
dram size =1024
card boot number = 0
card no is 0
sdcard 0 line count 0
[mmc]: SD/MMC Card: 4bit, capacity: 30028MB
[mmc]: vendor: Man 0x00275048 Snr 0x01da9202
[mmc]: product: SD32G
[mmc]: revision: 3.0
sdcard 0 init ok
The size of uboot is 0x000a4000.
sum=0x327d01a2
src_sum=0x327d01a2
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
[      0.173]

U-Boot 2011.09-rc1-00003-ge89ab14-dirty (Jan 03 2014 - 12:57:33) Allwinner Technology

[      0.182]version: 1.1.0
[      0.185]pmbus:   ready
[      0.290]PMU: AXP209
[      0.293]PMU: AXP20x found
[      0.296]PMU: bat ratio = 100
[      0.300]after set, dcdc2 =1450mv
[      0.303]PMU: dcdc2 1450
[      0.306]PMU: pll1 912 Mhz
boot_clock = 912
dcdc2_vol = 1450
[      0.314]after set, dcdc2 =1450mv
dcdc3_vol = 1300
ldo2_vol = 3000
ldo3_vol = 2800
ldo4_vol = 2800
power_start = 1
storage_type = -1
usb_recovery = 1
find power_sply to end
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[      0.350]DRAM:  1 GiB
relocation Offset is: 35b23000
donn't initialize ther user_gpio (main_key:boot_init_gpio)
DRV_DISP_Init: opened
[      0.563]boot_disp.output_type=3
[      0.567]boot_disp.output_mode=5
[      0.570]boot_disp.auto_hpd=1
workmode = 0
MMC:     0
SUNXI SD/MMC: 0
Man 275048 Snr 01da9202
SD32G
3.0
---------------MMC version 4.0---------------
---------------mmc->clock 50000000-----------
---------------mmc->bus_width 4--------------
boot0 capacity: 0KB,boot1 capacity: 0KB
[      1.911]sunxi flash init ok
In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:11-
-name-        -start-       -size-
bootloader  : 1000000       2000000
env         : 3000000       1000000
boot        : 4000000       1000000
system      : 5000000       20000000
recovery    : 25000000      2000000
databk      : 27000000      10000000
misc        : 37000000      1000000
private     : 38000000      1000000
data        : 39000000      40000000
cache       : 79000000      14000000
UDISK       : 8d000000      0
-----------------------------------
base bootcmd=run setargs_mmc boot_normal
bootcmd set setargs_mmc
key 0
recovery key high 6, low 4
cant find fstbt value
to be run cmd=run setargs_mmc boot_normal
the user data'magic is bad
WORK_MODE_BOOT
sunxi_bmp_display
WORK_MODE_BOOT
[      2.014]Hit any key to stop autoboot:  0
read boot or recovery all
[      2.552]sunxi flash read ffset 4000000, 12701248 bytes OK
[      2.563]ready to boot
[      2.565]
Starting kernel ...

aw_pm_init: not support super standby.
aw_pm_init: script_parser_fetch err.
notice: ir_wakeup = 0.
aw_pm_init: script_parser_fetch err.
notice: ir_addr_code = 0.
aw_pm_init: script_parser_fetch err.
notice: power_key = 87.
can't get item for emac_power gpio !
rtc_hw_init(416) err: set clksrc to external losc failed! rtc time will be wrong
sunxi_rtc_gettime(34): err, losc_err_flag is 1
##fb init:w=65536,h=65536,fbmode=0

[hdmi]hdmi module init
sunxi_rtc_gettime(34): err, losc_err_flag is 1
sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
init: reading config file
init: -----------没找到sata节点，nand启动--------------
init: FB_OPEN failed!
init: [william] tvstatus = 0!
init: HDMI status = 0, try 40 times!TV status = 0
init: start e2fsck listening...
[hdmi]hdmi module init
init: do_umount: /data
init: do_umount: /cache
init: dont need format /dev/block/UDISK
init: dont need format /dev/block/private
init: do_umount: /databk
ir_init: ir_wakeup script_get_item error.
ir_init: power_key script_get_item error.
ir_init: ir_addr_code script_get_item error.
init: untracked pid 1212 exited
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
android_usb: already disabled
init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
init: C_IN_START
init: path = /dev/block/data
init: C_IN_START
init: path = /dev/block/cache
init: untracked pid 1350 exited
init: untracked pid 1583 exited
sunxi_rtc_gettime(34): err, losc_err_flag is 1
init: untracked pid 1763 exited
init: untracked pid 1769 exited
init: untracked pid 1798 exited
init: untracked pid 1804 exited
init: untracked pid 1833 exited
init: untracked pid 1839 exited
init: untracked pid 1868 exited
init: untracked pid 1874 exited
init: untracked pid 1903 exited
init: untracked pid 1909 exited
init: untracked pid 1938 exited
init: untracked pid 1944 exited
init: untracked pid 1973 exited
init: untracked pid 1979 exited
.....