cb1 cb2 ct openwrt SDK

darren_cb

根据cubieboard官方的SDK结构，自己DIY制作 openwrt SDK

自己环境下编译没问题，现在放出来，提供大家试玩下。
能编译成功OK的，请回复下，失败的话，我也不一定能解，谢谢。
交叉编译环境参照附件的文档搭建

http://pan.baidu.com/s/1ntSPrOP
下载压缩包，解压后，进到openwrt-sdk目录

编译步骤：

$ source tools/scripts/envsetup.sh
Products
   0 - cb
   1 - cb2
   2 - ct
please select a board:2
   0 - ct-openwrt
please select a system:0
Creating working dirs

Build sdcard image:
    1. tf card boot
    (1)cb_build_card_image (compile code to prepare cb_install_tfcard)
    (2)cb_install_tfcard  storage_medium dev_label [pack]
       storage_medium: nand
       dev_label:      sdb sdc sdd ...
       for example:    cb_install_tfcard nand sdb

$cb_build_card_image
$cb_install_tfcard nand sdb

萤火虫

求问楼主，openwrt官网下载的固件无法开启wifi热点是为什么，试过两种芯片的usb wifi，也装了对应的驱动，都没成功。

yuxue

cb2 编译成功 ，使用结果 后面反馈

yuxue

咳  启动不起来

0.826162] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[    0.833480] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.839696] ohci-platform: OHCI generic platform driver
[    0.845046] platform 1c14400.usb: Driver ohci-platform requests probe deferral
[    0.852364] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
[    0.859734] usbcore: registered new interface driver usb-storage
[    0.865980] mousedev: PS/2 mouse device common for all mice
[    0.880880] input: axp20x-pek as /devices/soc.3/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
[    0.890509] LDO1: 1300 mV
[    0.893900] LDO2: 1800 <--> 3300 mV at 3000 mV
[    0.898883] LDO3: 700 <--> 3500 mV at 2275 mV
[    0.903547] LDO4: 1250 <--> 3300 mV at 2800 mV
[    0.908538] LDO5: 1800 <--> 3300 mV at 2800 mV
[    0.913479] DCDC2: 700 <--> 2275 mV at 1400 mV
[    0.918665] DCDC3: 700 <--> 3500 mV at 1300 mV
[    0.923305] axp20x 0-0034: AXP20X driver loaded
[    0.928799] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    0.937498] sunxi-mmc 1c0f000.mmc: Got CD GPIO #225.
[    0.942677] sunxi-mmc 1c0f000.mmc: base:0xf00f0000 irq:64
[    0.950484] sunxi-ss 1c15000.crypto-engine: Die ID 0
[    0.956814] TCP: cubic registered
[    0.960171] Initializing XFRM netlink socket
[    0.964465] NET: Registered protocol family 17
[    0.969019] 8021q: 802.1Q VLAN Support v1.8
[    0.973297] Registering SWP/SWPB emulation handler
[    0.978505] registered taskstats version 1
[    0.982899] LDO4: disabling
[    0.985867] LDO3: disabling
[    0.988851] regulator-dummy: disabling
[    0.993058] ah