CubieBoard3板子使用卡系统后,nand系统丢失

zlyny

nand为android v3固件,卡刷百度盘上的cubieez固件,每次进入cubieez系统后,拔掉tf卡,android系统就进不去了
串口输出如下

1. HELLO! BOOT0 is starting!
   
2. boot0 version : 3.0.0
   
3. dram size =2048
   
4. sum=0x65176209
   
5. src_sum=0x65176209
   
6. Ready to disable icache.
   
7. Jump to secend Boot.
   
8. [      0.130]
   
9. 
   
10. U-Boot 2011.09-rc1-00003-ge89ab14-dirty (Jan 03 2014 - 12:57:33) Allwinner Technology
    
11. 
    
12. [      0.140]version: 1.1.0
    
13. [      0.143]pmbus:   ready
    
14. [      0.247]PMU: AXP209
    
15. [      0.250]PMU: AXP20x found
    
16. [      0.253]PMU: bat ratio = 100
    
17. [      0.257]after set, dcdc2 =1450mv
    
18. [      0.260]PMU: dcdc2 1450
    
19. [      0.263]PMU: pll1 912 Mhz
    
20. boot_clock = 912
    
21. dcdc2_vol = 1450
    
22. [      0.271]after set, dcdc2 =1450mv
    
23. dcdc3_vol = 1300
    
24. ldo2_vol = 3000
    
25. ldo3_vol = 2800
    
26. ldo4_vol = 2800
    
27. power_start = 1
    
28. storage_type = -1
    
29. usb_recovery = 1
    
30. find power_sply to end
    
31. fel key old mode
    
32. run key detect
    
33. no key found
    
34. no key input
    
35. dram_para_set start
    
36. dram_para_set end
    
37. [      0.307]DRAM:  2 GiB
    
38. relocation Offset is: 75b23000
    
39. donn't initialize ther user_gpio (main_key:boot_init_gpio)
    
40. DRV_DISP_Init: opened
    
41. [      0.521]boot_disp.output_type=4
    
42. [      0.525]boot_disp.output_mode=11
    
43. [      0.528]boot_disp.auto_hpd=1
    
44. workmode = 0
    
45. [      1.832]NAND: NAND_UbootInit
    
46. NB1 : enter NAND_LogicInit
    
47. nand : get id_number_ctl from script, 3
    
48. not burn nand partition table!
    
49. NB1 : nand_info_init fail
    
50. [      8.275]nand init fail
    
51. fail to find part named env
    
52. Using default environment
    
53. 
    
54. In:    serial
    
55. Out:   serial
    
56. Err:   serial
    
57. --------fastboot partitions--------
    
58. mbr not exist
    
59. base bootcmd=run setargs_nand boot_normal
    
60. bootcmd set setargs_nand
    
61. key 0
    
62. recovery key high 6, low 4
    
63. cant find fstbt value
    
64. no misc partition is found
    
65. to be run cmd=run setargs_nand boot_normal
    
66. the part isn't exist
    
67. WORK_MODE_BOOT
    
68. WORK_MODE_BOOT
    
69. [      8.313]Hit any key to stop autoboot:  0
    
70. cant find part named boot
    
71. sunxi_flash - sunxi_flash sub-system
    
72. 
    
73. Usage:
    
74. sunxi_flash read command parmeters :
    
75. parmeters 0 : addr to load(hex only)
    
76. parmeters 1 : the name of the part to be load
    
77. [parmeters 2] : the number of bytes to be load(hex only)
    
78. if [parmeters 2] not exist, the number of bytes to be load is the size of the part indecated on partemeter 1
    
79. boota: bad boot image magic, maybe not a boot.img?
    
80. sunxi#

复制代码

是我操作有误么?

@allen

正解：

#mount /dev/mmcblk0p1 /mnt
#cd /mnt
#bin2fex script.bin script.fex
#vi script.fex
将 'nand_used=1' 改为 'nand_used=0'
#fex2bin script.fex script.bin
#cd
#umount /mnt
#reboot

重新刷NAND FLASH ，卡系统以后不会破坏NAND 的系统了。
http://docs.cubieboard.org/tutor ... oid/lubuntu_dual_os

daiyoko

從上面錯誤看，應該是 nand 未準備好，一直都是在用 TF 卡。

NB1 : enter NAND_LogicInit
nand : get id_number_ctl from script, 3
not burn nand partition table!
NB1 : nand_info_init fail
[      8.275]nand init fail
fail to find part named env

cool-fire

怎么解决啊，小白同求！！

klauszong

@allen 发表于 2014-12-24 10:37
http://docs.cubieboard.org/tutorials/cb2/development/how_to_use_android/lubuntu_dual_os

买回来郁闷了好几天，就是出这问题，终于找到了你的解决办法，希望能管用，晚上回去试试