CB2 NAND ，安裝不了 X1 求助！

axw_fae

今早用了 SD 開機了！ 使用教程上的 cubian-nandinstall 去安裝！

結果出現了問題！

第一次運行時！ 報錯
Check Partition table
Formating NAND devices

NO device specified!

再運行一次，出現
Check Partition table
Formating NAND devices

mke2fs 1.42.5 (29-Jul-2012)
Mount NAND partitions
mount: block device /dev/nanda is write-protected. mounting read-only
NTFS signature is missing

這個要如何解呀？

cubieplayer

看看这里，
https://github.com/cubieplayer/Cubian/issues/381

axw_fae

cubieplayer 发表于 2014-11-28 15:28
看看这里，
https://github.com/cubieplayer/Cubian/issues/381

感謝回覆！ 但是那一篇是指 運行 cubian-nandinstall 完成之後！

但是我是運行就報錯，根本完成不了呀！

axw_fae

是否是要先手動燒一版 linux 在 nand 中，然後再用 sd 去做呀！

看不太懂那一篇在說啥！

axw_fae

1. root@Cubian:/home/cubie# cubian-nandinstall
   
2. 
   
3.                                              
   
4. #    #   ##   #####  #    # # #    #  ####  
   
5. #    #  #  #  #    # ##   # # ##   # #    #
   
6. #    # #    # #    # # #  # # # #  # #      
   
7. # ## # ###### #####  #  # # # #  # # #  ###
   
8. ##  ## #    # #   #  #   ## # #   ## #    #
   
9. #    # #    # #    # #    # # #    #  ####  
   
10. 
    
11. 
    
12. Your data on /dev/nand will lost, Are you sure to continue?[y/n] y
    
13. Re-partitioning NAND device
    
14. check partition table copy 0: mbr: version 0x30303030, magic 00000000
    
15. magic 00000000 is not softw411
    
16. check partition table copy 1: mbr: version 0x30303030, magic 00000000
    
17. magic 00000000 is not softw411
    
18. check partition table copy 2: mbr: version 0x30303030, magic 00000000
    
19. magic 00000000 is not softw411
    
20. check partition table copy 3: mbr: version 0x30303030, magic 00000000
    
21. magic 00000000 is not softw411
    
22. all partition tables are bad!
    
23. check partition table copy 0: mbr: version 0x30303030, magic 00000000
    
24. check partition table copy 1: mbr: version 0x30303030, magic 00000000
    
25. check partition table copy 2: mbr: version 0x30303030, magic 00000000
    
26. check partition table copy 3: mbr: version 0x30303030, magic 00000000
    
27. 
    
28. ready to write new partition tables:
    
29. mbr: version 0x00000200, magic softw411
    
30. 2 partitions
    
31. partition  1: class =         DISK, name =   bootloader, partition start =      128, partition size =     2048 user_type=0
    
32. partition  2: class =         DISK, name =        linux, partition start =     2176, partition size =        0 user_type=0
    
33. 
    
34. write new partition tables? (Y/N)
    
35. y
    
36. verifying new partition tables:
    
37. check partition table copy 0: mbr: version 0x30303030, magic 00000000
    
38. magic 00000000 is not softw411
    
39. check partition table copy 1: mbr: version 0x30303030, magic 00000000
    
40. magic 00000000 is not softw411
    
41. check partition table copy 2: mbr: version 0x30303030, magic 00000000
    
42. magic 00000000 is not softw411
    
43. check partition table copy 3: mbr: version 0x30303030, magic 00000000
    
44. magic 00000000 is not softw411
    
45. all partition tables are bad!
    
46. rereading partition table... returned 0
    
47. Check partition table
    
48. 
    
49. *** Re-partition NAND device /dev/nand failed, Partition table has damaged ***
    
50. 
    
51. To fix the partition table, You can try to run cubian-nandinstall again. If the error still there, then you need to use livesuit restore a factory image first, then run cubian-nandinstall.
    
52. root@Cubian:/home/cubie#
    

复制代码

axw_fae

刷過 2 、3 次  原廠  lubuntu-desktop-nand.img  ，再安裝一樣報錯！

是要用那一個版本才行呀！

zixi0007

cubieplayer 发表于 2014-11-28 15:28
看看这里，
https://github.com/cubieplayer/Cubian/issues/381

我的cb2也装不了，期待版主帮忙解决一下。发帖求助好久了。

kagami

我的CT 卡刷 Cubian X 感觉还行，虽然速度比LXDE 卡一点 ，不过还是比优班图爽多了
只不过执行 sudo cubian-nandinstall 安装完成之后，的确识别在 NAND 上
可是拔掉 TF 就不能开机了 ，安装到 NAND 能够完全脱离 TF 卡吗？