OpenPCTV for cubietruck/cubieboard2 devel-20131128 (XBMC专用版) 发布

sxgpic

cedarx 硬解库要是发布闭源的二进制库，播放器直接调用其 API 就好了嘛。
不明白全志为什么不把 cedarx 硬解做成固定的 API 直接给各个播放器调用。

#define

Nice!

trytse

关注.!!{:soso_e102:}

wake

标记....

geckozb

新手，等大大们更新后，测试！

mrwang1992

装好了，还没看视频 但是估计就是软解 CPU 百分之40+ 伤不起啊。

sunbeyond

大神最近有何进展。

1360073602

留脚。。。哈

hermitbin

这个是可以折腾的

hermitbin

这个固件只能用无线网络吗，我在cb2上配置有线网络失败。
然后我手动配置/etc/network，我的配置如下：

1. # Network configuration
   
2. 
   
3. # Backend software to use for network management (e.g. "connman")
   
4. NETWORK_BACKEND="connman"
   
5. 
   
6. # "LAN" or "WLAN" or "" (default is "" <--> "LAN")
   
7. NETWORK="LAN"
   
8. 
   
9. # Network interface name or address (e.g. "eth0" or "00:0d:56:ec:ba:0c")
   
10. IFACE="eth0"
    
11. 
    
12. # Static IP address ("" for DHCP) in CIDR format (e.g. "192.168.1.1/24")
    
13. ADDRESS="192.168.1.29"
    
14. 
    
15. # Network gateway (e.g. "192.168.1.254")
    
16. GATEWAY="192.168.1.1"
    
17. 
    
18. # List of DNS servers (e.g. "192.168.1.253 192.168.1.254")
    
19. # This will override the DNS servers from DHCP
    
20. DNS_SERVER="10.10.0.1"
    
21. 
    
22. SSID=""
    
23. 
    
24. # "true" or ""
    
25. HIDDEN="false"
    
26. 
    
27. # "WEP" or "PSK" or "" or "RSN"
    
28. SECURITY="NONE"
    
29. 
    
30. PASSPHRASE=""
    
31. 
    
32. # set to "" to disable NTP
    
33. TIMESERVERS="0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org 3.pool.ntp.org"
    
34. 
    
35. # Services to be started at boot time
    
36. TELNET_SERVER="true"
    
37. FTP_SERVER="true"
    
38. HTTP_SERVER="false"
    
39. SAMBA_SERVER="false"
    
40. 
    
41. # Use Zeroconf service discovery
    
42. ZEROCONF="true"
    
43. 
    
44. # Static Samba shares can be defined as shown in the commented examples below,
    
45. # where <%>,<@>,<&>,<#> field separators must be present as shown (Note that
    
46. # the password cannot contain  these special delimiters):
    
47. 
    
48. #STATIC_SMB="username<%>password<@>ip<&>myservername<#>share1<#>share2<#>share3"
    
49. #STATIC_SMB="<%><@>ip<&>myservername<#>share1"
    
50. 
    
51. WAIT_FOR_SLOW_DEVICE="true"

复制代码

但通过ifconfig看到的信息中，Bcast不对，也ping不通路由：

1. eth0      Link encap:Ethernet  HWaddr 02:56:07:80:C6:51  
   
2.           inet addr:192.168.1.29  Bcast:255.255.255.255  Mask:0.0.0.0
   
3.           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
   
4.           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
   
5.           TX packets:50 errors:0 dropped:0 overruns:0 carrier:0
   
6.           collisions:0 txqueuelen:1000
   
7.           RX bytes:0 (0.0 B)  TX bytes:6135 (5.9 KiB)
   
8.           Interrupt:117 Base address:0x4000
   
9. 
   
10. lo        Link encap:Local Loopback  
    
11.           inet addr:127.0.0.1  Mask:255.0.0.0
    
12.           UP LOOPBACK RUNNING  MTU:16436  Metric:1
    
13.           RX packets:20 errors:0 dropped:0 overruns:0 frame:0
    
14.           TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
    
15.           collisions:0 txqueuelen:0
    
16.           RX bytes:1994 (1.9 KiB)  TX bytes:1994 (1.9 KiB)
    

复制代码

请问应该怎么配置