关于Cubietruck设置hostapd的问题

KochiyaOcean

系统是Lubuntu，hostapd.conf配置如下：

1. interface=wlan0
   
2. driver=nl80211
   
3. ssid=KisekiKaze
   
4. hw_mode=g
   
5. channel=5
   
6. wpa=2
   
7. wpa_passphrase=helloworld
   
8. wpa_key_mgmt=WPA-PSK
   
9. wpa_pairwise=TKIP
   
10. wpa_ptk_rekey=600
    
11. macaddr_acl=0
    

复制代码

在启动hostapd时收到如下信息：

1. F1 signature read @0x18000000=0x1591a962
   
2. bcmsdh_config_hw_oob_intr: Enter
   
3. DHD: dongle ram size is set to 245760(orig 245760)
   
4. dhd_bus_select_firmware_name_by_chip: firmware_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
   
5. Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
   
6. Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
   
7. dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
   
8. dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
   
9. bcmsdh_set_irq Flag = 1
   
10. dhd_bus_devreset: WLAN ON DONE
    
11. Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver mac=00:22:f4:f8:c3:89
    
12. Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
    
13.   Driver: 1.28.23.3 (r)
    
14.   Firmware: wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
    
15. wl_android_wifi_on: Success
    
16. <6>CFG80211-ERROR) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=02:22:f4:f8:c3:89
    
17. <6>CFG80211-ERROR) wl_cfg80211_set_channel : netdev_ifidx(5), chan_type(0) target channel(11)
    
18. Using interface wlan0 with hwaddr 00:22:f4:f8:c3:89 and ssid 'KisekiKaze'
    
19. <6>8021q: 802.1Q VLAN Support v1.8
    
20. <6>CFG80211-ERROR) wl_cfg80211_parse_ies : No WPSIE in beacon
    
21. <6>CFG80211-ERROR) wl_cfg80211_parse_ies : No WPSIE in beacon

复制代码

请问这是驱动问题么？有什么解决方法？

wwuw

如果是rtl8188eu的话，需要使用realtek自己的hostapd才行，官方的hostapd不能用。

KochiyaOcean

wwuw 发表于 2013-11-25 00:23
如果是rtl8188eu的话，需要使用realtek自己的hostapd才行，官方的hostapd不能用。

自带的那个BCM4329……看来还是另外买一块卡比较好……