CubieBoard中文论坛

 找回密码
 立即注册
搜索
热搜: unable
查看: 5187|回复: 1

为什么我用Win32DiskImager刷好系统后一直重启

[复制链接]
发表于 2015-12-8 19:36:52 | 显示全部楼层 |阅读模式
我用的是TTL的方法转USB可以通信,但是板子一直重启,没有办法起来系统?求各位大神指教,
出来的是一下这么一堆东西。然后不停的重启。



vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc2 power on
[mmc-msg] sdc2 power on
<6>[mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc2 set round clock 400000, src 24000000
[mmc-msg] sdc2 set rouVnd clock 400000, src 24000000
FS: Cannot open root device "mmcblk0p2" or unknown-block(179,2): error -6
Please append a correct "root=" boot optionVFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2): error -6
; here are the available partitions:
b300        15159296 mmcblk0  driver: mmcblPlease append a correct "root=" boot option; here are the available partitions:
k
  b301        15155200 mmcblk0p1 00000000-00b300        15159296 mmcblk0  driver: mmcblk
00-0000-0000-000000000000
  b301        15155200 mmcblk0p1 00000000-0000-0000-0000-000000000000<0>Kernel panic - not syncing: VFS: Unable t
o mount root fs on unknown-block(179,2)
[<c0014f14>] (unwind_backtrace+0x0/0x138) from Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)
[<c0594450>] (panic+0x8c/0x1cc)
[<c0594450>] (panic+0x8c/0x1cc) from [<c07f8dac>][<c0014f14>] (unwind_backtrace+0x0/0x138) from [<c0594450>] (panic+0x8c/0x1cc)
(mount_block_root+0x184/0x254)
[<c07f8dac>] (mount_block_root+0x184/0x254) from [<[<c0594450>] (panic+0x8c/0x1cc) from [<c07f8dac>] (mount_block_root+0x184/0x254)
c07f9078>] (mount_root+0xe8/0x108)
[<c07f9078>] (mount_root+0xe8/0x108) from [<c07f91f8[<c07f8dac>] (mount_block_root+0x184/0x254) from [<c07f9078>] (mount_root+0xe8/0x108)
>] (prepare_namespace+0x160/0x1c4)
[<c07f91f8>] (prepare_namespace+0x160/0x1c4) from [<c[<c07f9078>] (mount_root+0xe8/0x108) from [<c07f91f8>] (prepare_namespace+0x160/0x1c4)
07f8a50>] (kernel_init+0x1d4/0x218)
[<c07f8a50>] (kernel_init+0x1d4/0x218) from [<c000f51[<c07f91f8>] (prepare_namespace+0x160/0x1c4) from [<c07f8a50>] (kernel_init+0x1d4/0x218)
c>] (kernel_thread_exit+0x0/0x8)
[<c07f8a50>] (kernel_init+0x1d4/0x218) from [<c000f51c>] (kernel_thread_exit+0x0/0x8)
<2>CPU0: stopping
CPU0: stopping
[<c0014f14>] (unwind_backtrace+0x0/0x138) from [<c0013a74>] (handle_IPI+0x198/0x1cc)
[<c0014f14>] (unwind_backtrace+0x0/0x138) from [<c0013a74>] (handle_IPI+0x198/0x1cc)
[<c0013a74>] (handle_IPI+0x198/0x1cc) from [<c0008504>] (gic_handle_irq+0x50/0x58)
[<c0013a74>] (handle_IPI+0x198/0x1cc) from [<c0008504>] (gic_handle_irq+0x50/0x58)
[<c0008504>] (gic_handle_irq+0x50/0x58) from [<c000e600>] (__irq_svc+0x40/0x70)
[<c0008504>] (gic_handle_irq+0x50/0x58) from [<c000e600>] (__irq_svc+0x40/0x70)
Exception stack(0xef05bd58 to 0xef05bda0)
Exception stack(0xef05bd58 to 0xef05bda0)
bd40:                                                       00000000 60000093
bd40:                                                       00000000 60000093
bd60: 271ae953 271ae953 c08abb6a c08abb9e c084a6b4 0000003a 00000000 10624dd3
bd60: 271ae953 271ae953 c08abb6a c08abb9e c084a6b4 0000003a 00000000 10624dd3
bd80: 60000013 60000013 c08414c8 ef05bda0 c00396e4 c0039be4 60000013 ffffffff
bd80: 60000013 60000013 c08414c8 ef05bda0 c00396e4 c0039be4 60000013 ffffffff
[<c000e600>] (__irq_svc+0x40/0x70) from [<c0039be4>] (vprintk+0x3a4/0x5f8)
[<c000e600>] (__irq_svc+0x40/0x70) from [<c0039be4>] (vprintk+0x3a4/0x5f8)
[<c0039be4>] (vprintk+0x3a4/0x5f8) from [<c05945ac>] (printk+0x1c/0x2c)
[<c0039be4>] (vprintk+0x3a4/0x5f8) from [<c05945ac>] (printk+0x1c/0x2c)
[<c05945ac>] (printk+0x1c/0x2c) from [<c042fe5c>] (sw_mci_set_clk+0xb0/0x250)
[<c05945ac>] (printk+0x1c/0x2c) from [<c042fe5c>] (sw_mci_set_clk+0xb0/0x250)
[<c042fe5c>] (sw_mci_set_clk+0xb0/0x250) from [<c04302b0>] (sw_mci_set_ios+0x2b4/0x564)
[<c042fe5c>] (sw_mci_set_clk+0xb0/0x250) from [<c04302b0>] (sw_mci_set_ios+0x2b4/0x564)
[<c04302b0>] (sw_mci_set_ios+0x2b4/0x564) from [<c04209ec>] (mmc_power_up+0xc8/0x170)
[<c04302b0>] (sw_mci_set_ios+0x2b4/0x564) from [<c04209ec>] (mmc_power_up+0xc8/0x170)
[<c04209ec>] (mmc_power_up+0xc8/0x170) from [<c0422034>] (mmc_rescan+0x220/0x2e0)
[<c04209ec>] (mmc_power_up+0xc8/0x170) from [<c0422034>] (mmc_rescan+0x220/0x2e0)
[<c0422034>] (mmc_rescan+0x220/0x2e0) from [<c004e1a4>] (process_one_work+0x118/0x384)
[<c0422034>] (mmc_rescan+0x220/0x2e0) from [<c004e1a4>] (process_one_work+0x118/0x384)
[<c004e1a4>] (process_one_work+0x118/0x384) from [<c004e788>] (worker_thread+0x174/0x374)
[<c004e1a4>] (process_one_work+0x118/0x384) from [<c004e788>] (worker_thread+0x174/0x374)
[<c004e788>] (worker_thread+0x174/0x374) from [<c0052d88>] (kthread+0x84/0x90)
[<c004e788>] (worker_thread+0x174/0x374) from [<c0052d88>] (kthread+0x84/0x90)
[<c0052d88>] (kthread+0x84/0x90) from [<c000f51c>] (kernel_thread_exit+0x0/0x8)
[<c0052d88>] (kthread+0x84/0x90) from [<c000f51c>] (kernel_thread_exit+0x0/0x8)
<3>[hotplug]: try to kill cpu:0 failed!
[hotplug]: try to kill cpu:0 failed!
<0>Rebooting in 10 seconds..Rebooting in 10 seconds..
U-Boot SPL 2014.01-rc1-09165-gb4590df-dirty (May 09 2014 - 15:40:36)
Board: Cubieboard2
dram: 1024 MiB
CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
spl: not an uImage at 1600


U-Boot 2014.01-rc1-09165-gb4590df-dirty (May 09 2014 - 15:40:36) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
Board: Cubieboard2
I2C:   ready
DRAM:  1 GiB
WARNING: Caches not enabled
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   mii0
Warning: failed to set MAC address

Hit any key to stop autoboot:  0
sun7i#
sun7i#
sun7i#


本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?立即注册

x
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|Archiver|手机版|粤ICP备13051116号|cubie.cc---深刻的嵌入式技术讨论社区

GMT+8, 2024-11-25 06:39 , Processed in 0.019971 second(s), 16 queries .

Powered by Discuz! X3.4

© 2001-2012 Comsenz Inc. | Style by Coxxs

返回顶部