CubieBoard中文论坛

 找回密码
 立即注册
搜索
热搜: unable
查看: 9505|回复: 2

CB3无线网卡AP6210加载错误

[复制链接]
发表于 2015-4-27 16:59:32 | 显示全部楼层 |阅读模式
安装教程做的,最后在加载模块时报错!


insmod bcmdhd.ko

主要提示的错误有如下:
<4>mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
dhd_module_init: sdio_register_driver timeout or error

错误提示如下,略长。。。。

<6>bcmdhd: got gpio2, mapped to irqno-22
[  173.226336] bcmdhd: got gpio2, mapped to irqno-22
dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON
[  173.240177] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn on WL_REG_ON
<6>sdio wifi power state: on
[  173.652812] sdio wifi power state: on
<6>[mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  173.664752] [mmc-msg] sdc3 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc3 power on
[  173.677654] [mmc-msg] sdc3 power on
<6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  173.705692] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc3 set round clock 400000, src 24000000
[  173.721082] [mmc-msg] sdc3 set round clock 400000, src 24000000
<3>[mmc-err] smc 3 err, cmd 52,  RTO
[  173.803038] [mmc-err] smc 3 err, cmd 52,  RTO
<3>[mmc-err] smc 3 err, cmd 52,  RTO
[  173.812583] [mmc-err] smc 3 err, cmd 52,  RTO
<6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  173.825387] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  173.853284] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<3>[mmc-err] smc 3 err, cmd 8,  RTO
[  173.871860] [mmc-err] smc 3 err, cmd 8,  RTO
<6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[  173.884933] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[  173.910784] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
<4>mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[  173.923533] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<4>mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[  173.936317] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<4>mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[  173.950428] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
<6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[  173.980854] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
<6>[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[  173.999654] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
<6>[mmc-msg] sdc3 set round clock 42857143, src 600000000
[  174.015474] [mmc-msg] sdc3 set round clock 42857143, src 600000000
=========== WLAN placed in POWER ON ========
[  174.061567] =========== WLAN placed in POWER ON ========
<6>[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[  174.096352] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
<6>mmc1: new high speed SDIO card at address 0001
[  174.114650] mmc1: new high speed SDIO card at address 0001
Linux Kernel SDIO/MMC Driver
[  174.128173] Linux Kernel SDIO/MMC Driver
<6>bcmdhd: irq=-22, flags=0x00000414
[  174.136339] bcmdhd: irq=-22, flags=0x00000414
bcmsdh_probe: Host irq is not defined
[  174.144287] bcmsdh_probe: Host irq is not defined
<4>bcmsdh_sdmmc: probe of mmc1:0001:2 failed with error 1
[  174.154376] bcmsdh_sdmmc: probe of mmc1:0001:2 failed with error 1

Dongle Host Driver, version 1.28.23.3 (r)
Compiled in drivers/net/wireless/bcmdhd on Apr 26 2015 at 22:07:16
[  174.172006]
[  174.172036] Dongle Host Driver, version 1.28.23.3 (r)
[  174.172055] Compiled in drivers/net/wireless/bcmdhd on Apr 26 2015 at 22:07:16
<3>bcm4330: exports duplicate symbol bcmsdh_probe (owned by bcmdhd)
[  174.272908] bcm4330: exports duplicate symbol bcmsdh_probe (owned by bcmdhd)
<3>bcm4330: exports duplicate symbol bcmsdh_probe (owned by bcmdhd)
[  174.298786] bcm4330: exports duplicate symbol bcmsdh_probe (owned by bcmdhd)
dhd_module_init: sdio_register_driver timeout or error
[  186.192341] dhd_module_init: sdio_register_driver timeout or error
<1>Unable to handle kernel NULL pointer dereference at virtual address 00000014
[  186.205910] Unable to handle kernel NULL pointer dereference at virtual address 00000014
<1>pgd = ee448000
[  186.217194] pgd = ee448000
<1>[00000014] *pgd=00000000[  186.222404] [00000014] *pgd=00000000

<0>Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[  186.231017] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
<d>Modules linked in:[  186.238186] Modules linked in: bcmdhd(+) bcmdhd(+)

CPU: 0    Not tainted  (3.4.61+ #9)
[  186.246494] CPU: 0    Not tainted  (3.4.61+ #9)
PC is at bcmsdh_remove+0x14/0xc0 [bcmdhd]
[  186.255114] PC is at bcmsdh_remove+0x14/0xc0 [bcmdhd]
LR is at bcmsdh_sdmmc_remove+0x28/0x6c [bcmdhd]
[  186.264721] LR is at bcmsdh_sdmmc_remove+0x28/0x6c [bcmdhd]
pc : [<bf0213f4>]    lr : [<bf001694>]    psr: a0000013
sp : eea57e20  ip : 00000000  fp : 0000822d
[  186.279197] pc : [<bf0213f4>]    lr : [<bf001694>]    psr: a0000013
[  186.279218] sp : eea57e20  ip : 00000000  fp : 0000822d
r10: 00000000  r9 : bf062088  r8 : bf06074c
[  186.294722] r10: 00000000  r9 : bf062088  r8 : bf06074c
r7 : bf0623bc  r6 : 00000000  r5 : bf0639f4  r4 : ee9fa408
[  186.305333] r7 : bf0623bc  r6 : 00000000  r5 : bf0639f4  r4 : ee9fa408
r3 : bf012234  r2 : eea57e30  r1 : 60000013  r0 : ee9fa408
[  186.317098] r3 : bf012234  r2 : eea57e30  r1 : 60000013  r0 : ee9fa408
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[  186.329473] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c5387d  Table: 6e44806a  DAC: 00000015
[  186.341067] Control: 10c5387d  Table: 6e44806a  DAC: 00000015

SP: 0xeea57da0:
[  186.348525]
[  186.348534] SP: 0xeea57da0:

Segmentation fault



回复

使用道具 举报

 楼主| 发表于 2015-5-3 15:48:22 | 显示全部楼层
问题已解决
回复 支持 反对

使用道具 举报

发表于 2015-5-4 06:14:16 | 显示全部楼层
很有风格。。。。
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|Archiver|手机版|粤ICP备13051116号|cubie.cc---深刻的嵌入式技术讨论社区

GMT+8, 2024-11-22 19:18 , Processed in 0.021689 second(s), 15 queries .

Powered by Discuz! X3.4

© 2001-2012 Comsenz Inc. | Style by Coxxs

返回顶部