小白请教系统login账号密码

qwddn

之前“艰难地”把andoid系统刷为了linux：cubieez-cb2-nand-hdmi-v2.0.img。

http://forum.cubietech.com/forum ... &extra=page%3D1

找了很久登陆账号密码一无所获。。。

试了很久，也老不对。

（什么root啊，cubie啊都试过了，就是不对啊。还有，下次再刷其他系统，怎么知道root的账号密码呢？）
（千万不要告诉我，密码是“木有密码”。。。）

天资平庸，大牛勿喷。。。

leyiwo

Cubieez Firmware Update  
=======================

1.Firmware List
---------------
cubieez-cb2-card-hdmi-v2.0.img.7z | 20141127
cubieez-cb2-nand-hdmi-v2.0.img.7z | 20141127

2.Features
----------
-Kernel based on 3.4.79 cubietech
-Based on Debian 7.6 Wheezy
-Supported chromium-browser and web flash
-Can supported 720p video player
-Clock & date synchro with fake-hwclock (via ntp)
-LXDE base desktop with low mem consumption
-Audio CODEC (jack audio), sunhdmi (HDMI audio)  
-X11VNC, SSH (SFTP too) and other basic utils installed
-Gnome Mplayer (less CPU consumption than lxmusic)
-Benchmark tools (@ /root)
-SATA install supported

3.README
--------
- If this is your first boot, please open a Terminal (Ctrl+Alt+t) and run "cubie-config" as root
- Benchmark tools, Mali400 sources and more stuff can be found at /root
- X11VNC and SSH are running by default
- Youtube, Dailymotion, Crackle, etc can be viewed with root session
- Chromium can't run as root,please switch to cubie user
- If you Cubietuck can't mount sata,plaese format your sata device as root :
  Warnning :This Operation will clear all data in you sata,please make a backup
  1)log in as root with  X-window
  2)remove any usb disk device,insert you sata
  3)click "format-sata.sh" in the desktop,and "Execute" this script to format your sata

4.User&passwd
-------------
-user: cubie passwd:cubieboard
-user: root  passwd:cubieboard

qwddn

leyiwo 发表于 2015-1-12 23:31
Cubieez Firmware Update  
=======================

谢谢！

qwddn

leyiwo 发表于 2015-1-12 23:31
Cubieez Firmware Update  
=======================

原来是在image目录下面的readme里面~

leyiwo

qwddn 发表于 2015-1-13 01:06
谢谢！

不用谢，

qwddn

leyiwo 发表于 2015-1-13 09:45
不用谢，

再请教一下，我目前使用串口工具putty。
我发现有时候从键盘输入的字符并不是我想要的，请问这是咋回事？

connection -> serial 配置
speed: 115200,
data bits: 8
stop bits 1
parity: none
flow control: none

请问还有其他需要设置的地方吗？

qwddn

leyiwo 发表于 2015-1-13 09:45
不用谢，

MS把flow control 改为xon/xoff就行了。。。