sun7i(a20)使用dtb启动Linux3.17(sunxi-next)

quillan · 发表于 2014-10-13 16:18:05

U-Boot SPL 2014.04-10729-gd86884d-dirty (Oct 10 2014 - 18:22:17)
Board: Cubieboard2
DRAM: 1024 MiB
CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
spl: not an uImage at 1600

U-Boot 2014.04-10729-gd86884d-dirty (Oct 10 2014 - 18:22:17) Allwinner Technology

CPU: Allwinner A20 (SUN7I)
Board: Cubieboard2
I2C: ready
DRAM: 1 GiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In: serial
Out: serial
Err: serial
Net: dwmac.1c50000
Hit any key to stop autoboot: 0
reading uEnv.txt
** Unable to read file uEnv.txt **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
reading boot.scr
325 bytes read in 17 ms (18.6 KiB/s)
Jumping to boot.scr
## Executing script at 44000000
reading script.bin
45384 bytes read in 29 ms (1.5 MiB/s)
reading sun7i-a20-cubieboard2.dtb
23181 bytes read in 33 ms (685.5 KiB/s)
reading zImage
2682680 bytes read in 144 ms (17.8 MiB/s)
Kernel image @ 0x48000000 [ 0x000000 - 0x28ef38 ]
## Flattened Device Tree blob at 47000000
Booting using the fdt blob at 0x47000000
Loading Device Tree to 4fff7000, end 4ffffa8c ... OK

Starting kernel ...

quillan · 发表于 2014-10-13 16:21:00

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.17.0-rc3-156768-gbd9035a (quillan@quillan) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #4 SMP Fri Oct 10 18:01:37 CST 2014
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Cubietech Cubieboard2
[ 0.000000] Ignoring memory range 0x40000000 - 0x48000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] PERCPU: Embedded 7 pages/cpu @ef0d3000 s6912 r8192 d13568 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227856
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 init=/sbin/init rootwait panic=10
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 903952K/917504K available (3725K kernel code, 187K rwdata, 1032K rodata, 210K init, 227K bss, 13552K reserved, 139264K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000]    vector  : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000]    fixmap  : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000]    vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000]    lowmem  : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000]    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000]    modules : 0xbf000000 - 0xbfe00000 (  14 MB)
[ 0.000000]    .text : 0xc0008000 - 0xc04ad86c (4759 kB)
[ 0.000000]    .init : 0xc04ae000 - 0xc04e2b00 ( 211 kB)
[ 0.000000]    .data : 0xc04e4000 - 0xc0512d60 ( 188 kB)
[ 0.000000]       .bss : 0xc0512d60 - 0xc054bd2c ( 228 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
[ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[ 0.000018] Switching to timer-based delay loop, resolution 41ns
[ 0.000285] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[ 0.000415] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
[ 0.000586] Console: colour dummy device 80x30
[ 0.000612] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000626] pid_max: default: 32768 minimum: 301
[ 0.000734] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000746] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001279] CPU: Testing write buffer coherency: ok
[ 0.001547] /cpus/cpu@0 missing clock-frequency property
[ 0.001562] /cpus/cpu@1 missing clock-frequency property
[ 0.001574] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001634] Setting up static identity map for 0x4838a3b8 - 0x4838a410
[ 0.002656] CPU1: failed to boot: -38
[ 0.002694] Brought up 1 CPUs
[ 0.002700] SMP: Total of 1 processors activated.
[ 0.002707] CPU: All CPU(s) started in SVC mode.
[ 0.003249] devtmpfs: initialized
[ 0.006689] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 0.007032] pinctrl core: initialized pinctrl subsystem
[ 0.007378] regulator-dummy: no parameters
[ 0.012594] NET: Registered protocol family 16
[ 0.012873] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.017371] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.017385] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.023200] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
[ 0.023229] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
[ 0.023256] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[ 0.023269] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.023290] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[ 0.023302] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
[ 0.023486] vcc3v0: 3000 mV
[ 0.023702] vcc3v3: 3300 mV
[ 0.023925] vcc5v0: 5000 mV
[ 0.024117] axp-ipsout: 5000 mV
[ 0.024580] SCSI subsystem initialized
[ 0.024851] usbcore: registered new interface driver usbfs
[ 0.024912] usbcore: registered new interface driver hub
[ 0.025069] usbcore: registered new device driver usb
[ 0.025208] pps_core: LinuxPPS API ver. 1 registered
[ 0.025216] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.025243] PTP clock support registered
[ 0.026135] Switched to clocksource arch_sys_counter
[ 0.034954] NET: Registered protocol family 2
[ 0.035583] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.035673] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.035794] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.035865] TCP: reno registered
[ 0.035880] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.035933] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.036233] NET: Registered protocol family 1
[ 0.036608] RPC: Registered named UNIX socket transport module.
[ 0.036620] RPC: Registered udp transport module.
[ 0.036626] RPC: Registered tcp transport module.
[ 0.036632] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.037111] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 0.038113] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.048117] NFS: Registering the id_resolver key type
[ 0.048195] Key type id_resolver registered
[ 0.048202] Key type id_legacy registered
[ 0.048284] msgmni has been set to 1493
[ 0.049213] bounce: pool size: 64 pages
[ 0.049455] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.049475] io scheduler noop registered
[ 0.049489] io scheduler deadline registered
[ 0.049661] io scheduler cfq registered (default)
[ 0.049902] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
[ 0.051905] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 0.104686] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.107589] console [ttyS0] disabled
[ 0.127777] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[ 0.746575] console [ttyS0] enabled
[ 0.752020] stmmaceth 1c50000.ethernet: no regulator found
[ 0.757619] stmmaceth 1c50000.ethernet: no reset control found
[ 0.763448]  Ring mode enabled
[ 0.766515]  No HW DMA feature register supported
[ 0.771039]  Normal descriptors
[ 0.774359]  TX Checksum insertion supported
[ 0.782374] libphy: stmmac: probed
[ 0.785780] eth0: PHY ID 00008201 at 1 IRQ POLL (stmmac-0:01) active
[ 0.792325] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.798877] ehci-platform: EHCI generic platform driver
[ 0.804237] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[ 0.811542] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[ 0.818859] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.825057] ohci-platform: OHCI generic platform driver
[ 0.830383] platform 1c14400.usb: Driver ohci-platform requests probe deferral
[ 0.837672] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
[ 0.845414] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
[ 0.852235] sunxi-rtc 1c20d00.rtc: RTC enabled
[ 0.856764] i2c /dev entries driver
[ 0.864327] Adding alias for supply acin,(null) -> acin,0-0034
[ 0.870247] Adding alias for supply vin2,(null) -> vin2,0-0034
[ 0.876073] Adding alias for supply vin3,(null) -> vin3,0-0034
[ 0.881912] Adding alias for supply ldo24in,(null) -> ldo24in,0-0034
[ 0.888267] Adding alias for supply ldo3in,(null) -> ldo3in,0-0034
[ 0.894437] Adding alias for supply ldo5in,(null) -> ldo5in,0-0034
[ 0.900753] axp20x 0-0034: AXP20X driver loaded
[ 0.906509] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 0.914832] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
[ 0.920946] sunxi-mmc 1c0f000.mmc: Got CD GPIO #225.
[ 0.956152] sunxi-mmc 1c0f000.mmc: base:0xf00ac000 irq:64
[ 0.962413] usbcore: registered new interface driver usbhid
[ 0.968021] usbhid: USB HID core driver
[ 0.972394] TCP: cubic registered
[ 0.975718] NET: Registered protocol family 17
[ 0.980307] Key type dns_resolver registered
[ 0.984651] Registering SWP/SWPB emulation handler
[ 0.990647] ahci-5v: 5000 mV
[ 0.993922] usb1-vbus: 5000 mV
[ 0.997414] usb2-vbus: 5000 mV

quillan · 发表于 2014-10-13 16:21:27

[ 1.001292] ehci-platform 1c14000.usb: EHCI Host Controller
[ 1.006955] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[ 1.014792] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000
[ 1.036138] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 1.043061] hub 1-0:1.0: USB hub found
[ 1.046920] hub 1-0:1.0: 1 port detected
[ 1.051414] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 1.057051] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[ 1.064888] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000
[ 1.079094] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 1.087214] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 1.093971] mmc0: new high speed SDHC card at address aaaa
[ 1.100617] hub 2-0:1.0: USB hub found
[ 1.104435] mmcblk0: mmc0:aaaa SS08G 7.40 GiB
[ 1.109482] hub 2-0:1.0: 1 port detected
[ 1.113517]  mmcblk0: p1 p2
[ 1.117684] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[ 1.124325] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
[ 1.132228] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400
[ 1.200947] hub 3-0:1.0: USB hub found
[ 1.204734] hub 3-0:1.0: 1 port detected
[ 1.209285] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[ 1.215928] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
[ 1.223807] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400
[ 1.290964] hub 4-0:1.0: USB hub found
[ 1.294750] hub 4-0:1.0: 1 port detected
[ 1.299129] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:04 UTC (4)
[ 1.310849] ahci-5v: disabling
[ 1.313922] vcc5v0: disabling
[ 1.316958] vcc3v0: disabling
[ 1.321707] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[ 1.330592] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[ 1.353407] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.361595] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.372257] devtmpfs: mounted
[ 1.375464] Freeing unused kernel memory: 208K (c04ae000 - c04e2000)
sh: missing ]

*********** mount all **********
mount: according to /proc/mounts, proc is already mounted on /proc
mount: mounting devpts on /dev/pts failed: No such file or directory
mount: mounting usbfs on /proc/bus/usb failed: No such file or directory
********* Starting mdev ********
*** This may take some time...**

***********************
**** local service: ***
*** telnetd start *****

********************************
**** www.allwinnertech.com *****
***** www.linux-sunxi.org ******
********************************

quillan login: root
login[58]: root login on 'ttyS0'

Processing /etc/profile...
Set search library path in /etc/profile
Set user path in /etc/profile
Welcome to linux

[root@quillan ~]#

quillan · 发表于 2014-10-13 16:23:04

processor    : 0
model name    : ARMv7 Processor rev 4 (v7l)
Features       : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
CPU implementer : 0x41
CPU architecture: 7
CPU variant    : 0x0
CPU part       : 0xc07
CPU revision : 4

Hardware       : Allwinner sun7i (A20) Family
Revision       : 0000
Serial       : 0000000000000000

quillan · 发表于 2014-10-13 16:23:40

MemTotal:       904160 kB
MemFree:       894164 kB
MemAvailable:    891800 kB

quillan · 发表于 2014-10-13 16:25:24

Linux version 3.17.0-rc3-156768-gbd9035a (quillan@quillan) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #4 SMP Fri Oct 10 18:01:37 CST 2014

cini · 发表于 2014-10-15 08:52:51

不错啊
现在我在搞A80 的3.17 porting。有机会交流一下

cini · 发表于 2014-10-15 08:54:13

0.002656] CPU1: failed to boot: -38

貌似SMP启动不正常只启动了一个CPU。

quillan · 发表于 2014-10-15 12:07:01

cini 发表于 2014-10-15 08:54
0.002656] CPU1: failed to boot: -38

貌似SMP启动不正常只启动了一个CPU。

[ 0.002656] CPU1: failed to boot: -38
[ 0.002694] Brought up 1 CPUs
[ 0.002700] SMP: Total of 1 processors activated.

只启动了一个cpu，有空了再看看。

quillan · 发表于 2014-11-9 17:33:59

Booting Linux on physical CPU 0x0
Linux version 3.18.0-rc3-169379-g8c27ecb (quillan@quillan) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #13 SMP Sun Nov 9 17:31:26 CST 2014
CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Cubietech Cubieboard2
Ignoring memory range 0x40000000 - 0x48000000
Memory policy: Data cache writealloc
PERCPU: Embedded 9 pages/cpu @ef0d1000 s6912 r8192 d21760 u36864
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227856
Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext4 init=/sbin/init rootwait panic=10
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 903880K/917504K available (3762K kernel code, 192K rwdata, 1044K rodata, 216K init, 228K bss, 13624K reserved, 139264K highmem)
Virtual kernel memory layout:
vector  : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap  : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem  : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 (  14 MB)
   .text : 0xc0008000 - 0xc04b9b0c (4807 kB)
   .init : 0xc04ba000 - 0xc04f0000 ( 216 kB)
   .data : 0xc04f0000 - 0xc05202c0 ( 193 kB)
   .bss : 0xc05202c0 - 0xc0559584 ( 229 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
      RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 24.00MHz (virt).
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
Switching to timer-based delay loop, resolution 41ns
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
CPU: Testing write buffer coherency: ok
/cpus/cpu@0 missing clock-frequency property
/cpus/cpu@1 missing clock-frequency property
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x48396c98 - 0x48396cf0
Brought up 1 CPUs
SMP: Total of 1 processors activated.
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
vcc3v0: 3000 mV
vcc3v3: 3300 mV
vcc5v0: 5000 mV
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
msgmni has been set to 1493
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
console [ttyS0] disabled
dw-apb-uart 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
console [ttyS0] enabled
stmmaceth 1c50000.ethernet: no regulator found
stmmaceth 1c50000.ethernet: no reset control found
Ring mode enabled
No HW DMA feature register supported
Normal descriptors
TX Checksum insertion supported
libphy: stmmac: probed
eth0: PHY ID 00008201 at 1 IRQ POLL (stmmac-0:01) active
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-platform: EHCI generic platform driver
platform 1c14000.usb: Driver ehci-platform requests probe deferral
platform 1c1c000.usb: Driver ehci-platform requests probe deferral
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
platform 1c14400.usb: Driver ohci-platform requests probe deferral
platform 1c1c400.usb: Driver ohci-platform requests probe deferral
sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
sunxi-rtc 1c20d00.rtc: RTC enabled
i2c /dev entries driver
axp20x 0-0034: AXP20X driver loaded
sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
sunxi-mmc 1c0f000.mmc: Got CD GPIO
sunxi-mmc 1c0f000.mmc: base:0xf00ac000 irq:64
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
ahci-5v: 5000 mV
usb1-vbus: 5000 mV
usb2-vbus: 5000 mV
ehci-platform 1c14000.usb: EHCI Host Controller
ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000
ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-platform 1c1c000.usb: EHCI Host Controller
ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000
mmc0: host does not support reading read-only switch, assuming write-enable
ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
mmc0: new high speed SDHC card at address aaaa
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
mmcblk0: mmc0:aaaa SS08G 7.40 GiB
ohci-platform 1c14400.usb: Generic Platform OHCI controller
ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400
mmcblk0: p1 p2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ohci-platform 1c1c400.usb: Generic Platform OHCI controller
ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:05 UTC (5)
ahci-5v: disabling
vcc5v0: disabling
vcc3v0: disabling
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:2.
devtmpfs: mounted
Freeing unused kernel memory: 216K (c04ba000 - c04f0000)
sh: missing ]

*********** mount all **********
mount: according to /proc/mounts, proc is already mounted on /proc
mount: mounting devpts on /dev/pts failed: No such file or directory
mount: mounting usbfs on /proc/bus/usb failed: No such file or directory
********* Starting mdev ********
*** This may take some time...**

***********************
**** local service: ***
*** telnetd start *****

********************************
**** www.allwinnertech.com *****
***** www.linux-sunxi.org ******
********************************

quillan login: root
login[58]: root login on 'ttyS0'

Processing /etc/profile...
Set search library path in /etc/profile
Set user path in /etc/profile
Welcome to linux

[root@quillan ~]#

		自动登录	找回密码
密码			立即注册