|
|
CON1,接口定义
1 VLED+ Power for LED backlight (Anode)
2 VLED+ Power for LED backlight (Anode)
3 VLED- Power for LED backlight (Cathode)
4 VLED- Power for LED backlight (Cathode)
5 GND Power ground
6 VCOM Common voltage
7 DVDD Power for Digital Circuit
8 MODE DE/SYNC mode select
9 DE Data Input Enable
10 VS Vertical Sync Input
11 HS Horizontal Sync Input
12 B7 Blue data(MSB)
13 B6 Blue data
14 B5 Blue data
15 B4 Blue data
16 B3 Blue data
17 B2 Blue data
18 B1 Blue data Note 2
19 B0 Blue data(LSB)
20 G7 Green data(MSB)
21 G6 Green data
22 G5 Green data
23 G4 Green data
24 G3 Green data
25 G2 Green data
26 G1 Green data
27 G0 Green data(LSB)
28 R7 Red data(MSB)
29 R6 Red data
30 R5 Red data
31 R4 Red data
32 R3 Red data
33 R2 Red data
34 R1 Red data
35 R0 Red data(LSB)
36 GND Power Ground
37 D
tb403025_22 (2014-07-04 01:51:45):
37 DCLK Sample clock
38 GND Power Ground
39 L/R Left / right selection
40 U/D Up/down selection
41 VGH Gate ON Voltage
42 VGL Gate OFF Voltage
43 AVDD Power for Analog Circuit
44 RESET Global reset pin.
45 NC No connection
46 VCOM Common Voltage
47 DITHB Dithering function
48 GND Power Ground
49 NC No connection
50 NC No connection
屏幕的管脚定义是这样的线要怎么接？
还要那个系统比较好需要改哪里？硬件和文件？
|
|
|Archiver|手机版|粤ICP备13051116号|cubie.cc---深刻的嵌入式技术讨论社区
发表于 2014-7-8 01:45:37
发表于 2014-7-8 10:30:51
楼主
发表于 2014-7-11 10:10:02