有時候重啟出現"(or type Control-D to continue):"...

duke_cb

[ ok ] Setting preliminary keymap...done.
[ ok ] Setting parameters of disc: (none).
[ ok ] Activating swap...done.
<6>EXT4-fs (nandb): re-mounted. Opts: (null)
[   21.364441] EXT4-fs (nandb): re-mounted. Opts: (null)
[....] Checking root file system...fsck from util-linux 2.20.1
/dev/nandb contains a file system with errors, check forced.
/dev/nandb:                                                                     Unattached inode 4304


/dev/nandb: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
        (i.e., without -a or -p options)
fsck died with exit status 4
failed (code 4).
[....] An automatic file system check (fsck) of the root filesystem failed. A manual fsck must be performed, then the system restarted. The fsck should be perfo[FAILin maintenance mode with the root filesystem mounted in read-only mode. .. failed!
[....] The root filesystem is currently mounted in read-only mode. A maintenance shell will now be started. After performing system maintenance, press CONTROL-D[warnerminate the maintenance shell and restart the system. ... (warning).
Give root password for maintenance
(or type Control-D to continue):

近排出現了幾次呢..
重新刷系統後都有機會出現..
是什麼原因?

按下密碼後回到指令行..
都不知需要做什麼解決..

謝謝各位解決javascript:void(0)

我的板子是CB2 Cubian-desktop-r1-a20.img的img

看了一些字句好像是nand壞了.

但登入後檔案正常,回復備份會沒有事..

有時重啟就會這樣

duke_cb

發現用fsck 指令後重啟就沒有事了。

因為壞了我需要轉移cb，斷開了網絡，
再使用ssl usb連線電腦。

是不是時間問題令檔案權限更改了讀不出?

duke_cb

原來是斷電後出現的~~

duke_cb

想一想有沒有方法出現"fsck died with exit status 4"
就會自動修復呢??

例如只有網路控制的時候