cubieboard mjpg-streamer 开机启动 lubuntu

SUNROC1

注意：
操作系统：
cb官方lubuntu
mjpg安装请参考：
http://forum.cubietech.com/forum.php?mod=viewthread&tid=526&extra=
我的mjpg安装目录如下：
/home/linaro/mjpg-streamer


创建文件：

1. sudo vi /etc/init.d/webcam

复制代码

输入内容：

1. #! /bin/sh
   
2. # /etc/init.d/webcam
   
3. 
   
4. # Carry out specific functions when asked to by the system
   
5. case "$1" in
   
6.   start)
   
7.     echo "Starting webcam script"
   
8.     export LD_LIBRARY_PATH="/home/linaro/mjpg-streamer/mjpg-streamer"
   
9.     /home/linaro/mjpg-streamer/mjpg-streamer/mjpg_streamer -i "input_uvc.so -r 640x480 -f 15 -n" -o "output_http.so -p 8080 -w /home/linaro/mjpg-streamer/mjpg-streamer/www" &
   
10.     ;;
    
11.   stop)
    
12.     echo "Stopping webcam script"
    
13.     killall mjpg_streamer
    
14.     ;;
    
15.   *)
    
16.     echo "Usage: /etc/init.d/webcam {start|stop}"
    
17.     exit 1
    
18.     ;;
    
19. esac
    
20. 
    
21. exit 0

复制代码

上面代码里面，把目录换成你的安装目录即可

在终端中输入：

1. <span style="line-height: 1.5;">sudo</span><span style="line-height: 1.5;"> </span>/etc/init.d/webcam start

复制代码

即可启动mjpg

在终端中输入：

1. <span style="line-height: 1.5;">sudo</span><span style="line-height: 1.5;"> </span>/etc/init.d/webcam stop

复制代码

即可关闭mjpg

输入：

1. <span style="line-height: 1.5;">sudo</span><span style="line-height: 1.5;"> </span>update-rc.d webcam defaults

复制代码

设置开机启动

好了，不出意外的话，开机后，自动启用mjpg-streamer  ，再也不用输入命令了，只要知道ip地址，加上8080就能访问了

如果你没有屏幕，不想每次看输命令看ip地址，可以找一个路由器，把板子插在路由器的一号口，查询一次IP地址，以后就是固定的 了，不联网的前提下，

有什么问题请留言！



欢迎访问俺的网站：{:soso_e157:}{:soso_e121:}{:soso_e157:}http://www.heartiot.com/ {:soso_e157:}{:soso_e182:}{:soso_e157:}

zixi0007

mjpg-streamer  需要编译官方的lubuntu没有cmake 且安装不上提示
linaro@cubieboard2:/usr/mjpgstreamer/mjpg-streamer-code-182$ sudo apt-get install cmake
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  cmake-data emacsen-common libcurl3 libxmlrpc-core-c3
Suggested packages:
  gcc make
The following NEW packages will be installed:
  cmake cmake-data emacsen-common libcurl3 libxmlrpc-core-c3
0 upgraded, 5 newly installed, 0 to remove and 2 not upgraded.
Need to get 5098 kB of archives.
After this operation, 11.3 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
WARNING: The following packages cannot be authenticated!
  libcurl3 libxmlrpc-core-c3 emacsen-common cmake-data cmake
Authentication warning overridden.
Err http://ports.ubuntu.com/ubuntu-ports/ quantal/main libcurl3 armhf 7.27.0-1ubuntu1
  404  Not Found
Err http://ports.ubuntu.com/ubuntu-ports/ quantal/main libxmlrpc-core-c3 armhf 1.16.33-3.1ubuntu6
  404  Not Found
Err http://ports.ubuntu.com/ubuntu-ports/ quantal/main emacsen-common all 2.0.3
  404  Not Found
Err http://ports.ubuntu.com/ubuntu-ports/ quantal/main cmake-data all 2.8.9-0ubuntu1
  404  Not Found
Err http://ports.ubuntu.com/ubuntu-ports/ quantal/main cmake armhf 2.8.9-0ubuntu1
  404  Not Found
Failed to fetch http://ports.ubuntu.com/ubuntu-p ... -1ubuntu1_armhf.deb  404  Not Found
Failed to fetch http://ports.ubuntu.com/ubuntu-p ... .1ubuntu6_armhf.deb  404  Not Found
Failed to fetch http://ports.ubuntu.com/ubuntu-p ... ommon_2.0.3_all.deb  404  Not Found
Failed to fetch http://ports.ubuntu.com/ubuntu-p ... .9-0ubuntu1_all.deb  404  Not Found
Failed to fetch http://ports.ubuntu.com/ubuntu-p ... -0ubuntu1_armhf.deb  404  Not Found
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

SUNROC1

zixi0007 发表于 2014-7-16 21:32
mjpg-streamer  需要编译官方的lubuntu没有cmake 且安装不上提示
linaro@cubieboard2:/usr/mjpgstreamer/m ...

不需要cmake吧