貌似烧固件都烧不了:
[ 1213.683627] ioctl_aw--enter
[ 1213.683628] cmd = -2146405628
[ 1213.683629] ioctl_aw--AWUSB_IOCRECV
[ 1213.683629] buffer_len=13
[ 1213.683682] ioctl_aw--exit
[ 1213.683699] usb 3-4: aw closed.
[ 1214.234985] usb 3-4: USB disconnect, device number 17
[ 1214.235272] aw 3-4:1.0: USB aw disconnected.
[ 1218.341122] usb 3-4: new high-speed USB device number 18 using xhci_hcd
[ 1218.357406] usb 3-4: device descriptor read/8, error -75
[ 1218.477310] usb 3-4: device descriptor read/8, error -75
[ 1218.692818] usb 3-4: new high-speed USB device number 19 using xhci_hcd
[ 1218.692929] usb 3-4: Device not responding to set address.
[ 1218.896665] usb 3-4: Device not responding to set address.
[ 1219.100361] usb 3-4: device not accepting address 19, error -71
[ 1219.212306] usb 3-4: new high-speed USB device number 20 using xhci_hcd
[ 1219.212417] usb 3-4: Device not responding to set address.
[ 1219.416149] usb 3-4: Device not responding to set address.
[ 1219.619852] usb 3-4: device not accepting address 20, error -71
[ 1219.731801] usb 3-4: new high-speed USB device number 21 using xhci_hcd
[ 1219.731910] usb 3-4: Device not responding to set address.
[ 1219.935661] usb 3-4: Device not responding to set address.
[ 1220.139351] usb 3-4: device not accepting address 21, error -71
[ 1220.139431] hub 3-0:1.0: unable to enumerate USB device on port 4
MD明天找个Windows PC试一下。
|