ct无线模块bcmhd插入后出现问题，wlan0 off

oneleafpz

信息如下
=========== WLAN placed in POWER ON ========
<3>[mmc-err] smc 3 err, cmd 52,  RTO
[   20.170145] [mmc-err] smc 3 err, cmd 52,  RTO
<3>[mmc-err] smc 3 err, cmd 52,  RTO
[   20.187544] [mmc-err] smc 3 err, cmd 52,  RTO
<6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[   20.208956] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[   20.238621] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<3>[mmc-err] smc 3 err, cmd 8,  RTO
[   20.262134] [mmc-err] smc 3 err, cmd 8,  RTO
<6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[   20.283789] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[   20.315814] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
<4>mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[   20.336257] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<4>mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[   20.356518] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<4>mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[   20.377883] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
<6>[mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[   20.413798] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
<6>[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[   20.440243] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
<6>[mmc-msg] sdc3 set round clock 42857143, src 600000000
[   20.470269] [mmc-msg] sdc3 set round clock 42857143, src 600000000
<6>[mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[   20.548574] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
<6>mmc1: new high speed SDIO card at address 0001
[   20.573619] mmc1: new high speed SDIO card at address 0001
<3>bcm4330: exports duplicate symbol bcmsdh_probe (owned by bcmdhd)
[   20.650794] bcm4330: exports duplicate symbol bcmsdh_probe (owned by bcmdhd)
<3>bcm4330: exports duplicate symbol bcmsdh_probe (owned by bcmdhd)
[   20.672825] bcm4330: exports duplicate symbol bcmsdh_probe (owned by bcmdhd)
<3>ANDROID-ERROR) [   21.126073] ANDROID-ERROR) wl_android_wifictrl_func_add: platform_driver_register timeout
wl_android_wifictrl_func_add: platform_driver_register timeout
dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to turn off WL_REG_ON
<6>sdio wifi power state: off
[   21.292112] sdio wifi power state: off
=========== WLAN placed in POWER OFF ========
这是什么情况啊3.4.75的内核，就是lubuntu-v1.03的源代码啊
ap6210那个文件夹我放到/lib/firmware里了，编译时路径我也改了啊
gpio_sunxi我也编译了啊
不知道官方是怎么编译的