CubieTruck-LiveSuit107 & PhoenixSuit106 Win7下都無法刷機

adam@bj

*****LiveSuit107下,

Device Manager

****LiveSuit107停在此劃面,

LiveSuit107

DBView大致如下, (超過字數無法貼更多)
00000129 25.44504929 [6676] ----------down_para---------
00000130 25.44506836 [6676] /////////max downLoad items is 14. , configured downLoad is 6.
00000131 25.44508743 [6676] down_num       = 6
00000133 25.44510651 [6676] [download_para0]
00000134 25.44512367 [6676] part_name      = bootloader
00000135 25.44514465 [6676] pkt_name       = BOOTLOADER_00000
00000136 25.44516373 [6676] verify_file    = VBOOTLOADER_0000
00000137 25.44518089 [6676] encrypt        = 0
00000140 25.44521904 [6676] [download_para1]
00000141 25.44523811 [6676] part_name      = env
00000142 25.44525719 [6676] pkt_name       = ENVIROMENT_00000
00000143 25.44527626 [6676] verify_file    = VENVIROMENT_0000
00000144 25.44529343 [6676] encrypt        = 0
00000147 25.44533157 [6676] [download_para2]
00000148 25.44535065 [6676] part_name      = boot
00000149 25.44536972 [6676] pkt_name       = BOOT_00000000000
00000150 25.44538689 [6676] verify_file    = VBOOT_0000000000
00000151 25.44540596 [6676] encrypt        = 0
00000154 25.44544411 [6676] [download_para3]
00000155 25.44546127 [6676] part_name      = system
00000156 25.44548035 [6676] pkt_name       = SYSTEM_000000000
00000157 25.44549751 [6676] verify_file    = VSYSTEMFS_000000
00000158 25.44551659 [6676] encrypt        = 0
00000161 25.44555473 [6676] [download_para4]
00000162 25.44557381 [6676] part_name      = recovery
00000163 25.44559288 [6676] pkt_name       = RECOVERY_0000000
00000164 25.44561195 [6676] verify_file    = VRECOVERYFS_0000
00000165 25.44562912 [6676] encrypt        = 0
00000168 25.44566536 [6676] [download_para5]
00000169 25.44568443 [6676] part_name      = UDISK
00000170 25.44570351 [6676] pkt_name       = DISKFS_000000000
00000171 25.44572258 [6676] verify_file    =  
00000172 25.44574165 [6676] encrypt        = 0
00000174 25.44577980 [6676] ---uart para---
00000175 25.44579887 [6676] uart_debug_port    = 0.
00000176 25.44581795 [6676] uart_debug_tx = port:pB22<2><1><-1><-1>.
00000178 25.44583702 [6676] ----------fex misc---------
00000179 25.44585609 [6676] restore = 0
00000180 25.44587326 [6676] env_pkt = 0
00000181 25.44589233 [6676] storage_type = 255.
00000183 25.44591141 [6676] --[card_burn_para]--
00000184 25.44592857 [6676] card_no    = 2.
00000185 25.44594765 [6676] card_Line  = 4.
00000186 25.44596672 [6676] card_mode  = 1.
00000187 25.44598579 [6676] sdc_d1 = port:pC9<3><1><-1><-1>.
00000188 25.44600487 [6676] sdc_d0 = port:pC8<3><1><-1><-1>.
00000189 25.44602394 [6676] sdc_clk = port:pC7<3><1><-1><-1>.
00000190 25.44604301 [6676] sdc_cmd = port:pC6<3><1><-1><-1>.
00000191 25.44606400 [6676] sdc_d3 = port:pC11<3><1><-1><-1>.
00000192 25.44608307 [6676] sdc_d2 = port:pC10<3><1><-1><-1>.
00000193 25.44610214 [6676] ---[card_boot]---
00000194 25.44612122 [6676] logical_start = 40960
00000197 25.44615936 [6676] ============================================
00000198 25.45639420 [1448] FMAPP is running
00000199 27.41569901 [6676] ToolsFesFromImage 1088
****此時LiveSuit107會自動跳到右下角隱藏, 並且其內會有圖型"旋轉". 但是0%

LiveSuit107-U

-------------------------------------------------------------------------------------------
*********PhoenixSuit106
1.不管先開Phoenix或後開, 按著FEL, 再把CT連到Notebook上, 則PhoenixSuit會出現"No Device Attahed yet"
2.DebugView如下, (超過字數)
00000012 13.17301464 [7144] No deivce Attached!!!!!!!!!!!!
3.如果先開著PhoenixSuit, 再把CT接到Notebook上(先不按FEL), Phoenix會出現Device連接,

PhoenixSuit106

但差不多1分鐘CT會自動斷電, 且PS(PhoenixSuit)又變成 "No Device Attached yet"
且 DBView內的log會從 "attached" 變成 "No Device attached"
4.按照PS跳出的按power key 10數下也是沒用
5.如果按著FEL再接到NoteBook上, PS劃面會出現 "Begin to Upgrade"
但無反應.....

PS-Begin

DBView則如下內容,
00000000 0.00000000 [1192] IN 1
00000001 0.00304577 [1376] FMAPP is running
00000002 0.00826495 [6104] In WM_DEVICECHANGE
00000003 0.02805969 [1192] ********* before Fel2Fes *********
00000004 0.03234256 [1192] down and run fes1-1
00000005 0.03520320 [1192] Img_OpenItem now!  
00000006 0.03521228 [1192] Img_OpenItem[FES     ][FES_1-1000000000]
00000007 0.56089312 [1192] down and run fes1-2
00000008 0.56318259 [1192] Clear dram log OK.
00000009 0.56321651 [1192] Img_OpenItem now!  
00000010 0.56326544 [1192] Img_OpenItem[FES     ][FES_1-2000000000]
00000011 0.57475108 [1192] DOWN FES1_dram OK
00000012 29.62370872 [4048] FMAPP is running.
************PS************
此時CT只亮一個紅燈

如果拔掉OTG線, 則PS會跳出 "Fel2Fes Error"的框
DBView內容會出現一堆ERROR 和 ERROR (超過字數無法貼上)
********************
想請問下這是哪邊操作錯誤?

cb_100ask

楼主解决了么，同遇

nbweb

http://www.acyoo.com/archives/3386.html

按这个来刷试下