求助 ：cb3不能启动无线网卡问题

bayuemu

[  907.557362] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
[  907.573849] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
[  907.592996] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to insert WLAN RESET
[  907.715010] sdio wifi power state: off
[  907.828450] =========== WLAN placed in RESET ========
[  907.841662] wl_android_wifi_on: Failed
[  907.853249] wl_android_wifi_off in
[  976.141687] dhd_open, firmware path /lib/firmware/ap6210/fw_bcmxxxx.bin
[  976.163628] dhd_bus_select_firmware_name_by_chip: firmware_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
[  976.183998] net_ratelimit: 7 callbacks suppressed
[  976.205825]
[  976.205830] Dongle Host Driver, version 1.28.23.3 (r)
[  976.205836] Compiled in drivers/net/wireless/bcmdhd on Nov  6 2013 at 11:12:42
[  976.243038] wl_android_wifi_on in
[  976.260469] dhd_customer_gpio_wlan_ctrl: callc customer specific GPIO to remove WLAN RESET
[  976.412083] sdio wifi power state: on
[  976.554173] =========== WLAN going back to live  ========
[  976.568742] sdio_reset_comm():
[  976.587491] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[  976.615408] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[  976.641780] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[  976.669693] [mmc-msg] sdc3 set round clock 400000, src 24000000
[  976.746539] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[  976.776988] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[  976.795759] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[  976.814404] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[  976.834169] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[  976.868421] [mmc-msg] sdc3 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[  976.893310] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[  976.915118] [mmc-msg] sdc3 set round clock 42857143, src 600000000
[  976.991891] [mmc-msg] sdc3 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[  977.012197]
[  977.012204]
[  977.012207] dhd_bus_devreset: == WLAN ON ==
[  977.044112] F1 signature read @0x18000000=0x1591a962
[  977.059581] bcmsdh_config_hw_oob_intr: Enter
[  977.078988] DHD: dongle ram size is set to 245760(orig 245760)
[  977.100661] dhd_bus_select_firmware_name_by_chip: firmware_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
[  977.122125] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
[  977.139961] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
[  977.158928] _dhdsdio_download_firmware: dongle image file download failed
[  977.176318] dhd_dev_reset: dhd_bus_devreset: -35
[  977.192794] dhd_prot_ioctl : bus is down. we have nothing to do
[  977.209336] dhd_dev_reset: dhd_bus_devreset: -35
[  977.228021] dhd_customer_gpio_wlan_ctrl: call customer specific GPIO to insert WLAN RESET
[  977.379421] sdio wifi power state: off
[  977.521040] =========== WLAN placed in RESET ========
[  977.528517] wl_android_wifi_on: Failed
[  977.531328] dhd_open: failed with code -35
[  977.533432] wl_android_wifi_off in

gsoft

刷官方固件可以。

ashwing

http://pan.baidu.com/s/103AAA

把这个文件夹  放到/lib/firmware 下

bayuemu

ashwing 发表于 2013-11-8 23:39
http://pan.baidu.com/s/103AAA

把这个文件夹  放到/lib/firmware 下

这个固件是我自己编译的，难道官方默认的配置 cb3 没有把 无线作为 默认项？？谢谢你 lib包，谢谢