cubietruck突然坏了

lmmmcc

[size=13.3333px]我的cubietruck板突然不能启动了，接电后电源插头附近的红灯亮了一秒钟就变暗了，LED2闪了一下就灭了。按FEL接USB线连电脑也没有反应，无法刷机。发邮件给[size=14.6667px]fix@cubietech.com也没回应

[size=13.3333px]1.如果插入存储卡，串口打印
[size=13.3333px]U-Boot SPL 2017.05 (Jun 24 2017 - 15:49:02)

[size=13.3333px]然后就停了。

[size=13.3333px]2. 不插存储卡，串口打印

[size=13.3333px]HELLO! BOOT0 is starting!
[size=13.3333px]boot0 version : 2.0.0▒
[size=13.3333px]read dram para.
[size=13.3333px]dram driver version: 1.15

[size=13.3333px]或者

[size=13.3333px]HELLO! BOOT0 is starting!
[size=13.3333px]boot0 version : 2.0.0▒
[size=13.3333px]read dram para.
[size=13.3333px]dram driver version: 1.15
[size=13.3333px]dram size =2048MB
[size=13.3333px]0xffffffff
[size=13.3333px]super_standby_flag = 0
[size=13.3333px]Succeed in opening nand flash.
[size=13.3333px]block from 2 to 6
[size=13.3333px]deal block 2
[size=13.3333px]Succeed in reading Boot1 file head.
[size=13.3333px]The size of Boot1 is 0x00068000.
[size=13.3333px]The file stored in 0x00000000 of block 2 is perfect.
[size=13.3333px]Check is correct.
[size=13.3333px]Ready to disable icache.
[size=13.3333px]Succeed in loading Boot1.
[size=13.3333px]Jump to Boot1.
[size=13.3333px][       0.151] boot1 version : 2.0.0
[size=13.3333px][       0.151] script installed early ok
[size=13.3333px][       0.152] pmu type = 3
[size=13.3333px][       0.256] bat vol = 1303 mv
[size=13.3333px][       0.270] axi:ahb:apb=4:2:2
[size=13.3333px][       0.270] set dcdc2=1450mv, clock=912M successed
[size=13.3333px][       0.272] key
[size=13.3333px][       0.285] no key found
[size=13.3333px][       0.285] flash init start
[size=13.3333px][       0.285] NB1 : enter NFB_Init
[size=13.3333px][       0.288] NB1 : enter phy init
[size=13.3333px][       0.291] [NAND] nand driver(b) version: 0x0x00000002, 0x0x00000012, data: 0x20130627
[size=13.3333px][       0.299] get the good blk ratio from hwscan : 912
[size=13.3333px][       0.304] NB1 : nand phy init ok
[size=13.3333px][       0.353] nand part 0 sec count is not align
[size=13.3333px][       0.353] nand part 4 start sec is not align
[size=13.3333px][       0.357] nand part 0 sec count is not align
[size=13.3333px][       0.361] nand part 4 start sec is not align
[size=13.3333px][       0.366] nand part 1819 sec count is not align
[size=13.3333px][       0.370] NB1 : init ok
[size=13.3333px][       0.373] flash init finish
[size=13.3333px][       0.378] fs init ok

[size=13.3333px]就不动了。

ahha007

看样子要返厂维修，请联系fix@cubietech.com
或者联系support@cubietech.com

lmmmcc

好的。谢谢