外壳啥时候出？
soloforce 发表于 2015-1-14 12:51 static/image/common/back.gif
改到第三版了，貌似很不错了
改了一些啥？
jerryli 发表于 2015-1-14 12:53 static/image/common/back.gif
改了一些啥？
http://cubieboard.org/2015/01/04/cubieboard4cc-a80-in-factory/
After 8 months working, we lunched into the first batch mass production of CubieBoard4 (aka CC-A80) two days ago.We modified the hardware design again and again. Right now, it’s the 3rd revision which is very encouraging in my heart. I’d like to tell you the reasons if you have been waiting for it. We rejected the 1st version because the audio connector (earphone+ microphone jack) is too high. That mean we chose a audio connector liked by none of us. Some connectors were also too close to each other. In the 2nd revision, we found that the power output was not strong enough and the heatsink was not suit for repairing and DIY as well.
jerryli 发表于 2015-1-14 12:53 static/image/common/back.gif
改了一些啥？
主要修改点：
1、改了散热片的设计，原来那种方式虽然效果好，但是影响维修，贴上去了机器要是主控坏了无法维修。现在采用了PC主板的那种方式，有定位柱的。
2、改了大家吐槽的天线与定位柱会有结构冲突的问题。
jerryli 发表于 2015-1-14 12:52 static/image/common/back.gif
外壳啥时候出？
先用着吧，原来的外观设计还没有定，有一个想法但是成本过高，后面等外观设计出来之后我放设计图片出来给大家看。
drycony 发表于 2015-1-14 12:11 static/image/common/back.gif
额，版型有变化啊。。亏了。
不亏，后面等外壳出来之后送个外壳给你玩玩。
drycony 发表于 2015-1-14 12:12 static/image/common/back.gif
话说软体服务到现在还不行，系统不能在线升级。。。这个方面和树莓派差距好大。 ...
说细一些，我们尝试着去做。。
wo0121 发表于 2015-1-14 01:01 static/image/common/back.gif
这里人气紧缺
鲁迅说：世上本没有路，走的人多了就成了路。从我做起，带动大家。
jerryli 发表于 2015-1-14 12:53 static/image/common/back.gif
改了一些啥？
软件这边的进展:
http://pan.baidu.com/s/1o69LhjW#path=%252FModel%252Fcc-a80%252FImage
aaron 发表于 2015-1-14 15:33 static/image/common/back.gif
软件这边的进展:
http://pan.baidu.com/s/1o69LhjW#path=%252FModel%252Fcc-a80%252FImage
希望有Debian-server的版本:handshake